Panasonic KX-PS8000 Manual

Make sure that you use a high-quality laser paper: 60-105 

g

/m

2

(16-28 lbs.) paper in the media trays and 75-165 

g

/m

2

(20-44 lbs.)

paper in the multi-purpose tray.

Make sure that the media thickness switch is set correctly for the
installed media.

Use only recommended transparencies.
We cannot guarantee the results of other transparencies in 
KX-PS8000 printers.

Frequent media jams.

Fan the paper or transparencies before installing them in their
respective trays; this is especially important for transparencies
because they tend to stick together.

Make sure that you have loaded paper in the paper tray and
transparencies in the transparency tray.

Make sure that the media is installed under the hooks at the front of
the media tray.

If printing on transparencies and your printer has a 2nd Cassette
Feeder, make sure that the transparency tray is installed in the upper
or middle tray slot.

Clean the paper-pick rollers.

If you are using media that is 105 

g

/m

2

(28 lbs.), check if the Face

Down media output setting is selected in the driver. If it is, change the
setting to Face Up.

Make sure that the media is installed under the hooks at the front of
the media tray.

Do not overfill the media tray, as indicated by the red line on the right
side of the tray.

Clean the paper-pick rollers.

Frequent paper-picking errors.

■