Panasonic CZ256ESMC3 Operating Guide
2
Features
This unit is a centralized air conditioning management system designed for use with precision air
conditioning systems (PAC, air conditioning systems for offices and shops, and multi-unit systems for
buildings) and gas heat pump (GHP) air conditioners.
z
With one of these units you can connect and control up to 128 indoor units (2 systems of 64 units each) and 60 outdoor units (2 systems of
30 units each).
z
By connecting a communication adaptor this can be increased to 256 indoor units and 120 outdoor units.
z
The unit is equipped with a 10.4-inch TFT colour touch panel display (1024 x 768 dots), enabling control by almost anyone.
Operation and status
P.23
You can check to operational status (ON/OFF, operating
mode, alarms, etc.) of all indoor units and outdoor units in
real time.
You can also select indoor units to change their settings.
Distributing air conditioner
energy
P.71
You can view cumulative operating times for indoor units,
engine operating times for outdoor units, and operation
cycles in a list. (Cumulative values)
Using these data, you can calculate the distribution ratio of
electricity or gas consumed for air conditioning and volumes
used (kWh, m
3
) per indoor unit or in an area, then show
these calculations in a list.
Operation scheduling
P.39
You can register daily operation schedules (ON/OFF time,
operating modes, set temperatures, etc.) for individual
indoor units or groups of indoor units.
Operations can be schedule for up to 2 years in advance.
Remote control
P.122
The LAN terminal on this unit enables you connect it to a
network.
Connecting to Internet will enable you to operate the unit
and check the status using a PC from a remote location.