Panasonic KXHNS107 Operating Guide
This section describes commonly used system features, the devices required for each example, and
briefly explains the required settings.
briefly explains the required settings.
While away from home, you can receive a notification on your mobile device if the alarm system is
triggered.
triggered.
Required devices
R Mobile device (smartphone or tablet) with an Internet connection
R Wireless router
R Hub (KX-HNB600)
R Any device equipped with a sensor that can trigger the alarm system
R Mobile device (smartphone or tablet) with an Internet connection
R Wireless router
R Hub (KX-HNB600)
R Any device equipped with a sensor that can trigger the alarm system
– Indoor Camera (KX-HNC200, KX-HNC210)
– Outdoor Camera (KX-HNC600)
– Window/Door Sensor (KX-HNS101)
– Motion Sensor (KX-HNS102)
– Glass Break Sensor (KX-HNS104)
– Outdoor Camera (KX-HNC600)
– Window/Door Sensor (KX-HNS101)
– Motion Sensor (KX-HNS102)
– Glass Break Sensor (KX-HNS104)
Required procedures
R Hub initial setup and mobile device registration
R Hub initial setup and mobile device registration
Refer to the System Setup Guide included with your hub.
R Device registration (if you didn’t purchase the device as part of a pre-configured bundle)
Refer to the Installation Guide included with your device.
R Use the [Home Network] app to make sure the desired sensor is enabled for the [Arm: Away] arm
mode.
See “Alarm system settings”, Page 46.
See “Alarm system settings”, Page 46.
R Use the [Home Network] app to set the arm mode to [Arm: Away].
While away from home, you can access the system and view live camera images.
Required devices
R Mobile device (smartphone or tablet) with an Internet connection
R Wireless router
R Hub (KX-HNB600)
R A camera
R Mobile device (smartphone or tablet) with an Internet connection
R Wireless router
R Hub (KX-HNB600)
R A camera
– Indoor Camera (KX-HNC200, KX-HNC210)
– Outdoor Camera (KX-HNC600)
– Outdoor Camera (KX-HNC600)
Required procedures
R Hub initial setup and mobile device registration
R Hub initial setup and mobile device registration
Refer to the System Setup Guide included with your hub.
R Camera registration (if you didn’t purchase the camera as part of a pre-configured bundle)
Refer to the Installation Guide included with your camera.
R Use the [Home Network] app to access the desired camera.
You can configure the system to record video from a camera if motion is detected.
Required devices
R Mobile device (smartphone or tablet) with an Internet connection
R Wireless router
R Hub (KX-HNB600)
R An SD card (inserted in the hub)
R A camera
R Mobile device (smartphone or tablet) with an Internet connection
R Wireless router
R Hub (KX-HNB600)
R An SD card (inserted in the hub)
R A camera
29
Usage examples