Panasonic NVHV61EBL Instruction Manual

(Automatic tuning)

!

Turn on your television set.

!

With the Stand-by/on switch turn on the VCR. Automatic tuning for all 
available TV stations begins. Approximate duration is 5 minutes. 

!

After Automatic tuning has finished, press EXIT. The Owner ID screen will appear.

- While Auto Setup is running the first digit of the VCR display will flash. After a 

while it will stop flashing and the RF output channel number will be displayed. 

- Select an unused channel pre-set on your TV and tune it to the RF output 

channel number shown on the VCR display (or until you can clearly see the 
Auto Setup screen). Store the new video playback channel (refer to the 
instructions for your TV). 

VCR Display

You can complete the Owner ID now or skip this step and do it later. To do it 
later, press the EXIT button. Your VCR is now ready to use.

!

To set the Owner ID now, press the Numeric buttons or  

    to enter a four-

digit PIN number. 

!

Press   , to correct the digit. 

!

Make sure that you will remember the PIN number (make a note of it).

!

Press the ENTER button twice to confirm.

!

Enter the [Name], [House No] and [Postcode] in the same way.

!

Press the ENTER button to confirm each entry.

!

Press the EXIT button to leave the Owner ID screen. 

!

You will now see the TV picture. Your VCR is now ready to use.

Owner ID

PIN number  : ****

Name            : **************

House No     : ***********

Postcode      : ***********

    

:select

  

       

 : store

 

 

  : exit

 

 

 

You now have the opportunity

to enter your details and

help the police crack crime 

see instruction book.

Datum / Zeit

Clock set

Time       : 12 : 00 : 00

Date       : 11.    6.  04

MANUAL

!

Press  

 to set the correct time and date.

!

Press the ENTER button to finish this setting.

(Auto clock set was not possible due to a weak signal)

D

Mind that a wrong date or time will influence the programmed recording of TV 
programmes (don't forget to change summer time and winter time).

D

In some cases, the RF output channel may interfere with the TV stations 
transmitted in your area. This may prevent you from seeing the On-Screen 
Display clearly. Please see page 14 for removing the interference before 
restarting Auto Setup (page 29).

 

Auto Setup

 

 

  : exit

 

 

Tuning                :   Ch  21