Panasonic KXLD720 Installation Guide

  

         

    

 

 

  

 

  

 

2.  How to install the device driver after inserting the supplied Interface Card
(When "New Hardware Found" window appears)
=========================================================
Make sure that the Interface Cable is connected to the Interface Card and to the CD-ROM Player.
(1) Turn on your computer.

Windows 95 automatically starts.

(2) Turn on the CD-ROM Player. (Except KXL-8XXA series)
(3) Insert the Interface Card into the computer's card slot firmly.

The "New Hardware Found" window appears.

(4) Select “Driver from disk provided by hardware manufacturer” then click OK.

The “Install from disk” window appears.

(5) Insert the supplied Setup disk into the computer's floppy disk drive, and click OK.

The initial screen appears and the driver has been installed..

(6) Remove the Setup disk from the computer.

2.1  How to install the device driver after inserting the supplied Interface Card
(When "Update Device Driver Wizard" window appears)
=========================================================
Make sure that the Interface Cable is connected to the Interface Card and to the CD-ROM Player.
(1) Turn on your computer.

Windows 95 automatically starts.

(2) Turn on the CD-ROM Player. (Except KXL-8XXA series)
(3) Insert the Interface Card into the computer's card slot firmly.

The "Update Device Driver Wizard" window appears.

(4) Insert the supplied Setup disk into the computer's floppy disk drive, and click Next >.
(5) Click Finish.

The "Insert Disk" window appears.

(6) Click OK.

The "Copying Files..." window appears.

(7) Enter the drive name in "Copying files from: ", where the Setup disk is inserted in.

(If you are using drive A, enter " a: ".)

(8) Click OK.