Panasonic DMC LX 3 Operating Guide

VQT1T39

Connect the camera to a printer via the USB connection cable A 

Do not use any other USB connection cables except the supplied one. Use of cables other than 

the supplied USB connection cable may cause malfunction.

Turn the camera off before connecting or disconnecting the AC adaptor (DMW-AC5E; 

optional).

Before inserting or removing a card, turn the camera off, and disconnect the USB connection 

cable.

You cannot switch between the built-in memory and the card while the camera is connected to 

the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect 

the USB connection cable to the printer again.

When the pictures in RAW files are to be printed, the JPEG pictures recorded simultaneously 

by the camera will be printed. If JPEG pictures do not exit, RAW file pictures cannot be printed.

A USB connection cable (supplied)

Check the directions of the connectors, and plug them straight in or unplug them straight out. 

(Otherwise the connectors may be bent out of shape which will cause trouble.)

B Align the marks, and insert.
C AC adaptor (DMW-AC5E; optional)

Use a battery with a sufficient battery power or the AC adaptor (DMW-AC5E; optional). If the 

remaining battery power becomes low while the camera and the printer are connected, the 

status indicator blinks and the alarm beeps. If this happens during printing, stop printing at 

once. If not printing, disconnect the USB connection cable.

When the camera is connected to the printer, the cable disconnect prohibit icon [å] appears. 

Do not disconnect the USB cable while [å] is displayed.

Press 3/4 to select [PictBridge(PTP)], and then 

DC IN

AV

 OUT/

DIGIT

AL

COMPONENT

OUT

USB MODE

SELECT

SET

PLEASE SELECT 
THE USB MODE

PictBridge(PTP)

PC

EB-DMC-LX3_eng.book  116 ページ  ２００８年７月１４日　月曜日　午後７時３８分