Panasonic DMC LX 3 Operating Guide
123
VQT1T39
Connecting to other equipment
Select [CONVERSION] on the [REC] menu.
•
Refer to
P92
for [CONVERSION].
Press 3/4 to select [ ], and then press [MENU/SET] to set.
Note
•
When there is dirt (water, oil, and fingerprints, etc.) on the surface of the lens, the image may
be affected. Lightly wipe the surface of the lens with a soft, dry cloth before and after taking
pictures.
•
When the wide conversion lens is removed, set [CONVERSION] to [OFF].
•
When you take pictures at close range, the resolution of the periphery of the picture may
decrease slightly. This is not a malfunction.
•
Refer to operating instructions of the wide conversion lens for details.
•
Turn off the camera when removing the conversion lens.
•
When the [CONVERSION]
(P92)
is set to [
], the flash is fixed to [Œ].
Using the Protector/Filter
The MC protector (DMW-LMC46; optional) is a transparent filter which affects neither the
colours nor the amount of light, so it can always be used to protect the camera’s lens.
The ND filter (DMW-LND46; optional) reduces the amount of light to approximately 1/8th
(equal to adjusting the aperture value 3 increments) without affecting the colour balance.
PL filter (DMW-LPL46; optional) will suppress the reflected light from a metal or non
spherical surfaces (flat non-metallic surfaces, water vapour or invisible particles in the air),
making it possible to take a picture with enhanced contrast.
Preparations: Turn off the camera and remove the lens cap.
colours nor the amount of light, so it can always be used to protect the camera’s lens.
The ND filter (DMW-LND46; optional) reduces the amount of light to approximately 1/8th
(equal to adjusting the aperture value 3 increments) without affecting the colour balance.
PL filter (DMW-LPL46; optional) will suppress the reflected light from a metal or non
spherical surfaces (flat non-metallic surfaces, water vapour or invisible particles in the air),
making it possible to take a picture with enhanced contrast.
Preparations: Turn off the camera and remove the lens cap.
Remove the lens ring front.
•
Be careful not to lose the lens ring front.
Attach the lens adaptor.
•
Rotate the lens slowly and carefully.
A Lens adaptor (DMW-LA4; optional)
Attach a filter.
B MC protector
C ND filter
D PL filter
C ND filter
D PL filter
4
5
1
2
3
EB-DMC-LX3_eng.book 123 ページ 2008年7月14日 月曜日 午後7時38分