Panasonic DMC LX 3 Operating Guide

VQT1T39

∫ Prefocus
This allows the camera to be focused in advance on an arbitrary point. It is useful when it 
is difficult to achieve a sharp focus using autofocus or the subject is fast-moving.
This function is suitable when the distance between the camera and the subject is certain.

You can also use manual focus while in motion picture mode, but the focus cannot be adjusted 

during recording.

If you focus on the subject in Wide and then rotate the zoom lever to Tele, the focus may not be 

adequate. In this case, focus on the subject again.

The MF assistance does not appear when using the digital zoom.

The distance to the subject displayed on the screen in manual focus is an approximation of the 

focus position. Use the MF assistance screen for a final check of the focus.

After cancelling power save mode, focus on the subject again.

[REC] mode: 

It is possible to register up to 4 sets of current camera settings as custom sets.
•

Set to the mode dial to the desired mode and select the desired menu settings in advance.

Press 3/4 to select the custom set to 

The custom settings registered in [

] can be 

used with the [

] of the mode dial. It will be 

convenient if the custom setting used often is 

registered, since it can be used by just setting the 

mode dial.

The custom settings registered in [

], [

], 

or [

] can be selected in the [

] of the mode dial. Up to 3 custom settings can be 

registered, so select the one matching the needs.

Press 3 to select [YES] and then press 

When [YES] is selected, the settings that were 

previously stored are overwritten.

You cannot save the following menu items because 

they affect other recording modes.

[CLOCK SET]

[TRAVEL DATE]

[SCENE MENU]

[RESET]

[NO.RESET]

[BABY1]/[BABY2] or [PET] birthday and name settings in scene mode

MENU

/SET

MENU

/SET

DMC-LX3-Body1_mst.fm  62 ページ  ２００８年７月１５日　火曜日　午後７時５０分