Panasonic DMC LX 3 Operating Guide
Connecting to other equipment
- 156 -
Connecting to other equipment
Connecting to a PC
You can acquire recorded pictures to a PC by connecting the camera and the PC.
•
•
You can easily print out or mail the pictures you have imported. Use of the
“
PHOTOfunSTUDIO-viewer-
”
bundled software on the CD-ROM (supplied) is a convenient
way of doing this.
•
Read the separate operating instructions for the supplied software for more information about
the software in the CD-ROM (supplied) and how to install it.
Preparations:
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
Turn on the camera and the PC.
Remove the card before using the pictures in the built-in memory.
Connect the camera to a PC via the USB connection cable A
(supplied).
•
Do not use any other USB connection cables except the supplied one. Use of
cables other than the supplied USB connection cable may cause malfunction.
A USB connection cable (supplied)
•
Check the directions of the connectors, and plug them straight in or unplug them straight out.
(Otherwise the connectors may be bent out of shape which will cause trouble.)
B Align the marks, and insert.
C AC adaptor (optional)
C AC adaptor (optional)
•
Use a battery with sufficient battery power or the AC adaptor (optional). If the remaining battery
power becomes low while the camera and the PC are communicating, the status indicator
blinks and the alarm beeps.
before disconnecting the
USB connection cable. Otherwise, data may be destroyed.
1
DC IN
AV OUT/ DIGIT
AL
COMPONENT
OUT