Panasonic DMC LX 3 Operating Guide

Do not use any other USB connection cables except the supplied one. Use of cables other than 

the supplied USB connection cable may cause malfunction.

Turn the camera off before connecting or disconnecting the AC adaptor (optional).

Before inserting or removing a card, turn the camera off, and disconnect the USB connection 

cable.

You cannot switch between the built-in memory and the card while the camera is connected to 

the printer. Disconnect the USB connection cable, insert (or remove) the card and then connect 

the USB connection cable to the printer again.

When the pictures in RAW files are to be printed, the JPEG pictures recorded simultaneously 

by the camera will be printed. If JPEG pictures do not exit, RAW file pictures cannot be printed.

Press 2/1 to select the picture and then press 

The message disappears in about 2 seconds.

Press 3 to select [PRINT START] and then press 

Refer to 

 for the items which can be set before starting to 

print the pictures.

Press [MENU/SET] to cancel printing halfway.

Disconnect the USB connection cable after printing.

PictBridge

MULTI PRINT

1/9

1/9

1/9

100_0001

1/9

100_0001

PLEASE SELECT
THE PICTURE TO PRINT

SELECT

PRINT

OFF

1

CANCEL

SELECT

SET

PRINT START

PRINT WITH DATE
NUM. OF PRINTS
PAPER SIZE

PAGE LAYOUT

SINGLE SELECT