Panasonic DMCGM5EB Operating Guide
213
8. Stabiliser, Zoom and Flash
¢ These options are not displayed when the flash (supplied) is attached to the camera.
∫
Setting the output of communication light
Set the communication light level for wireless recording.
Settings: [HIGH]/[STANDARD]/[LOW]
[External
Flash]
Flash]
[Firing Mode]
[TTL]:
The camera automatically sets the output.
[AUTO]:
¢
Flash output is set by the external flash.
[MANUAL]:
Set the luminosity ratio of the external flash manually.
[OFF]:
The flash on the camera side emits only communication light.
[Flash Adjust.]
Set the output of the external flash manually when [Firing Mode] is set to
[TTL].
Set the output of the external flash manually when [Firing Mode] is set to
[TTL].
[Manual Flash Adjust.]
Set the luminosity ratio of the external flash when [Firing Mode] is set to
[MANUAL].
Set the luminosity ratio of the external flash when [Firing Mode] is set to
[MANUAL].
•
You can set from [1/1] (full brightness) to [1/64] in steps of 1/3.
[A Group]/
[B Group]/
[C Group]
[B Group]/
[C Group]
[Firing Mode]
[TTL]:
The camera automatically sets the output.
[AUTO]:
The wireless flashes automatically set the output.
[MANUAL]:
Set the luminosity ratio of the wireless flash manually.
[OFF]:
The wireless flashes of the specified group will not fire.
[Flash Adjust.]
Adjust the output of the wireless flashes manually when [Firing Mode] is set to
[TTL].
Adjust the output of the wireless flashes manually when [Firing Mode] is set to
[TTL].
[Manual Flash Adjust.]
Set the luminosity ratio of the wireless flash when [Firing Mode] is set to
[MANUAL].
Set the luminosity ratio of the wireless flash when [Firing Mode] is set to
[MANUAL].
•
You can set from [1/1] (full brightness) to [1/64] in steps of 1/3.
>
[Rec]
> [Flash] > [Communication Light]
MENU