Panasonic DMCGM5EB Operating Guide
303
11. Using the Wi-Fi function
[Wi-Fi Setup] Menu
Configure the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
The settings cannot be changed when connected to Wi-Fi.
•
•
For details on how to enter characters, refer to
section on
•
If you are using the PC with standard settings, you do not need to change the workgroup.
>
[Setup]
> [Wi-Fi] > [Wi-Fi Setup] > Desired item to be set
[LUMIX CLUB]
Acquires or changes the “LUMIX CLUB” login ID.
[PC Connection]
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as
the destination PC is required.
(The default setting is “WORKGROUP”.)
To send images to a PC, a connection to the same workgroup as
the destination PC is required.
(The default setting is “WORKGROUP”.)
[Change Workgroup Name]:
Enter the workgroup of the connecting PC.
[Restore to Default]:
Restores the default state.
Enter the workgroup of the connecting PC.
[Restore to Default]:
Restores the default state.
[Device Name]
You can change the name of this unit.
1
Press [DISP.].
2
Enter the desired device name.
•
•
For details on how to enter characters, refer to
section on
.
•
A maximum of 32 characters can be entered.
MENU