Panasonic DMCLX15EB Operating Guide
Selecting pictures from 4K burst file and saving
2
1
Select a picture with the [
] on the playback screen, and press
●
In the case of recording with [ ] ([4K Pre-Burst]), proceed to the step
3
.
2
Drag the slide bar to perform rough scene selection
3
Touch and drag the frames to select the frame you want to save as a picture
4
Touch [
] to save the picture
●
The picture will be saved in JPEG format.
To record the subject with reduced blur
Set mode dial to [ ]
Set the shutter speed by rotating the rear dial
Set the shutter speed by rotating the rear dial
●
Approximate shutter speed for outdoor recording in fine weather conditions: 1/1000 seconds or faster.
●
If you increase the shutter speed, the ISO sensitivity becomes higher, which may increase the noise on the screen.
Changing a focus point after recording ([Post Focus] / [Focus Stacking])
You can record bursts of photos with the same quality as a 4K photo while automatically changing the focus point.
Recording using [Post Focus]
●
We recommend using a tripod to perform [Focus Stacking].
1
Press [ ] button
2
Press to select [ON] and press [MENU/SET]
3
Determine the composition and press the shutter button halfway
●
Do not change the distance to subject or the composition.
4
Press the shutter button fully to start recording
●
When the recording progress bar disappears, recording automatically ends.
■
To cancel [Post Focus]: Select [OFF] in step
2
.
Increasing the focus range ([Focus Stacking])
You can combine multiple pictures from pictures recorded using [Post Focus] to create
a single picture with an expanded focus range.
a single picture with an expanded focus range.
1
Touch [
] on screen in step
2
of “Selecting a focus point
([Post Focus])”
2
Choose a stacking method and touch it
Settings: [Auto Merging] / [Range Merging]
3
(When selecting [Range Merging])
Touch the focus point
●
Select positions at two or more points.
●
Focus positions between the two points are
selected and the range of the in-focus portion is
displayed.
selected and the range of the in-focus portion is
displayed.
●
The ranges that are greyed out are positions that
cannot be selected, or that would produce an
unnatural result if selected for focus stacking.
cannot be selected, or that would produce an
unnatural result if selected for focus stacking.
●
Touch a position again to deselect it.
Reset
Reset
Set/Cancel
Set/Cancel
4
Touch [
] to combine and save the picture
●
The picture will be saved in JPEG format.
Selecting a focus point ([Post Focus])
After recording, you can select a point on the screen to save a picture with that point
as the focus point.
as the focus point.
1
On the playback screen, select the image with the [
]
icon and press
2
Touch the focus point
●
If there are no pictures with the focus on the
selected point, a red frame will be displayed, and
pictures cannot be saved.
selected point, a red frame will be displayed, and
pictures cannot be saved.
●
You can make fine adjustments to the focus by
dragging the slide bar during enlarged display.
dragging the slide bar during enlarged display.
3
Touch [
] to save the picture
●
The picture will be saved in JPEG format.