Panasonic CZCSWBC2 Operating Guide
4-1-2.
BACnet Maintenance Settings
[Procedure]
From the menu bar, select “BACnet” – “BACnet maintenance settings”.
From the menu bar, select “BACnet” – “BACnet maintenance settings”.
These maintenance settings are used to temporarily stop monitoring an indoor unit
with a BACnet indoor unit number during construction work or if a fault has occurred
with the unit. Cancelling maintenance can also be performed from this screen.
with a BACnet indoor unit number during construction work or if a fault has occurred
with the unit. Cancelling maintenance can also be performed from this screen.
· BACnet number
: Number assigned to the indoor unit from BACnet
communication with the central monitor.
· Maintenance status
:Displays the maintenance setting status.
4-1-2-1.
Setting Method
1.
Click the I/D unit to be set to add a check to the selection column.
2.
When
is clicked,
the “Set maintenance ON as for the
selected I/D units (Out_Of_Service=
TRUE)” message is displayed.
selected I/D units (Out_Of_Service=
TRUE)” message is displayed.
:Settings are performed.
:Settings are not performed.
3.
When the settings are performed, “Executing maintenance...”
is displayed in the maintenance status column.
is displayed in the maintenance status column.