Panasonic CUHE9PKE Operating Guide

8

To learn more...

Use this air conditioner under the following temperature range.
DBT  : Dry bulb temperature
WBT : Wet bulb temperature

Temperature (°C)

Indoor

Outdoor

DBT

WBT

DBT

WBT

COOL 

Max. 32

23

43

26

Min. 16

11

16

11

HEAT 

Max. 30

-

24

18

Min. 16

-

-15

-

+8/10°C

HEAT

Max.

10

-

-

-

Min.

8

-

-15

-

: Unit takes a while to warm up. The power indicator blinks during this operation.

• Unit may stops warm air supply for deice. The deice indicator ON during this operation.
COOL

: Use curtains to screen off sunlight and outdoor heat to reduce power consumption during cool mode.

: Unit operates at low fan speed to give a gentle cooling operation.

: To circulate air in the room

: During operation mode selection the power indicator blinks.

• Unit selects operation mode every 10 minutes according to temperature setting and room temperature.

Depending on the unit’s accumulated operation time, nanoe-G in-fi lter deactivation may activate only once a day after 
the unit turned off.
To remove the moisture left in the internal parts, the fan will operate for 30 minutes with louver opened slightly. This 
process only applicable when the unit is operated in COOL/DRY mode before turned off. Then, nanoe-G deactivates 
viruses/bacteria on the fi lter for 2 hours with fan stopped and louver closed.
Do not turn off the power supply during this operation. After power failure, this operation will not resume.

Set
temperature

HEAT

COOL/DRY

+1 °C

-1 °C

-1 °C

ECONAVI ; Detecting sunlight intensity, the unit adjust temperature to save energy.

ECONAVI is activated, 
the unit maintains set 
temperature until a high 
sunlight intensity is detected. 
The sunlight sensor detects 
sunlight intensity during 
weather or day/night 
changes, and the unit adjusts 
temperature.

• In a room without window or with thick curtain, the sunlight sensor will judge as cloudy/night.