Panasonic DMCGH4GH Operating Guide

 Getting Started/Basic Operations

48

Press [LVF] to switch between the Monitor and Viewfinder.

A Eye sensor

•

The monitor/viewfinder will switch as follows:

¢ If [Eye Sensor AF] in the [Custom] menu is set to [ON], the camera automatically adjusts the 

focus as the eye sensor is activated. 

•

You can also switch between the viewfinder and the monitor in [LVF/Monitor Switch] in [Eye 
Sensor] in the [Custom] menu. 

∫

Automatic viewfinder/monitor switching enables the eye sensor to switch the display to the 
viewfinder automatically when you bring your eye or an object near it.
•

[

] will be displayed for a few seconds after you have enabled automatic viewfinder/monitor 

switching or performed certain other operations.

•

Eye sensor might not work properly depending on the shape of your eyeglasses, the way you 
hold the camera, or bright light shining around the eyepiece. In that case, press [LVF] to switch 
the display.

•

During motion picture playback or a slide show, the camera does not automatically switch the 
display to the Viewfinder with the eye sensor.

•

You can set the eye sensor sensitivity in [Eye Sensor] in the [Custom] menu. 

•

When the viewfinder surface becomes dirty, remove the eyecup, blow away the dust with a 
blower (commercially available), and wipe the surface lightly with a dry, soft cloth.

[LVF]/[Fn5] button can be used in two ways, as [LVF] or as 
[Fn5] (function 5). At the time of purchase, it is initially set 
to [LVF/Monitor Switch].
•

Refer to 

 for details about the function button.

¢

¢

ロヷョ

ロヷョ

Fn5