Panasonic KX-HCM10 Operating Guide
Operating Instructions
72
Setting explanation
a.
The active time of trigger is set between 9:00 AM to 6:00 PM on
Monday to Friday.
When the alarm occurs in the setting time, the images are transferred
to FTP server and the notification is sent to the specified user via e-
mail.
The alarm trigger is on when the sensor signal is changed to the
[Rising] (GND to Open High) of the digital input terminal of I/O
Connector.
Monday to Friday.
When the alarm occurs in the setting time, the images are transferred
to FTP server and the notification is sent to the specified user via e-
mail.
The alarm trigger is on when the sensor signal is changed to the
[Rising] (GND to Open High) of the digital input terminal of I/O
Connector.
b.
The secondary time is set inactive.
c.
The transferring image size is 160 x 120 and the image quality is
standard.
standard.
d.
Enables the Post-alarm Buffering:
20 frames after the alarm detection will be buffered by 1 image per
second.
20 frames after the alarm detection will be buffered by 1 image per
second.
e.
Setting of FTP server:
IP Address — 192.168.0.200
Login ID — Panasonic
Password — *******
Upload File name — KXHCM10
File name and time stamp is named to the file.
(Example: KXHCM1020010101093000000.jpg)
Underlined numbers are "9 h 30 min 00 s 000 ms on January 1, 2001".
IP Address — 192.168.0.200
Login ID — Panasonic
Password — *******
Upload File name — KXHCM10
File name and time stamp is named to the file.
(Example: KXHCM1020010101093000000.jpg)
Underlined numbers are "9 h 30 min 00 s 000 ms on January 1, 2001".
f.
Mail server address — xxx.xxx.ne.jp
Mail is sent to HCM10@xxx.xxx.ne.jp.
Subject is [Mail Transfer].
Text is [Alarm was generated].
Mail is sent to HCM10@xxx.xxx.ne.jp.
Subject is [Mail Transfer].
Text is [Alarm was generated].
Transfer in the Timer Mode
The timer mode can be activated by entering the active time, the image setting,
frequency setting and the transfer method on the Image Transfer window.
Buffering Image can also be transferred via e-mail or FTP. The timer mode uses
the Network Camera internal clock. Please make sure Date and Time setting has
been configured. Please refer to Page 59 about Date and Time setting.
frequency setting and the transfer method on the Image Transfer window.
Buffering Image can also be transferred via e-mail or FTP. The timer mode uses
the Network Camera internal clock. Please make sure Date and Time setting has
been configured. Please refer to Page 59 about Date and Time setting.
1.
Click [Timer] on the Image Transfer window.