Panasonic KX-PS8000 Operating Guide
13
Before You Start
■
Static Electricity Damage
To prevent static electricity damage to any of the following components, touch a grounded metal surface,
such as the printer’s bare metal frame prior to touching the component.
such as the printer’s bare metal frame prior to touching the component.
B
The interface connectors : SCSI, parallel and optional network
B
ADF interface connector
B
Electrical components, connectors inside the printer and any components on the optional board (RAM
Expansion Board or Ethernet Card)
Expansion Board or Ethernet Card)
B
The connector pins on the optional 2nd cassette feeder for the printer
■
Interface Cable
Always use a shielded interface cable. Use of an unshielded cable can result in radio interference with data.
■
Waste Disposal Method
Waste material may be dumped or incinerated under conditions which meet all federal, state and local
environmental regulations.
environmental regulations.
B
Do not place heavy objects on
the disc case or drop the case.
the disc case or drop the case.
B
To clean the disc, hold the disc
by its edges and wipe it from
the center to the edges with a
dry, soft cloth.
by its edges and wipe it from
the center to the edges with a
dry, soft cloth.
B
Do not leave the disc in direct
sunlight or near heat sources.
sunlight or near heat sources.
B
Do not touch or write on the
surface of the disc.
surface of the disc.
B
Do not leave the disc out of the
protective case.
protective case.
■
CD-ROM
To prevent the CD-ROMs from accidental damages: