Panasonic KX-PS8000 Operating Guide

B

The printer must be the last device in the chain. The terminator setting of all
other devices in the chain must be off.

■

Make sure the computer, printer and the other connected
peripheral devices are turned off.

Connect the SCSI cable to the computer’s SCSI connector and
the printer’s SCSI connector.

B

A SCSI-2 board must be installed in the computer.
If you do not have a SCSI-2 board or a SCSI interface cable, you will need to
purchase one from your local computer store or dealer 

( 

☞ 

P. 16, 157 “SCSI

Interface” specifications)

.

Make sure the SCSI ID No. of the printer is 1 (default setting).

B

If you have other devices connected to the computer, make sure that each
SCSI device has different ID No.

B

To change the printer’s ID No., use the ID No. switches (#1, #2, #3) located
on the back of the printer. Also refer to Table 1 on 

page 52

.