Panasonic DP-C322 Operating Guide
Pr
oduct
Over
vie
w
11
■ Auto Image Density/ Colour Registration Adjustment
Function
This machine executes the following automatic
adjustment periodically. (approximately every 100
copies or print jobs) During the automatic adjustment
process, copy job/ print job will stop or jobs will be
waited approximately 60 seconds.
(1) Auto Image Density
This machine executes the following automatic
adjustment periodically. (approximately every 100
copies or print jobs) During the automatic adjustment
process, copy job/ print job will stop or jobs will be
waited approximately 60 seconds.
(1) Auto Image Density
To adjust the print density even.
(2) Colour Registration Adjustment
To adjust the colour registration.
Main Power
Switch (Rear
Side)
Switch (Rear
Side)
ON ( )
OFF ( )
Handling
■ Control Panel
Do not lift or lean against the Control Panel. The Control
Panel can be broken which could result in injury.
Panel can be broken which could result in injury.
■ Power Switch
● When you turn ON or OFF the Main Power Switch on
the Rear Side of the machine, turn ON or OFF the
Power Switch on the Left Side of the machine and
wait a few seconds, and then turn ON or OFF the
Main Power Switch.
Power Switch on the Left Side of the machine and
wait a few seconds, and then turn ON or OFF the
Main Power Switch.
● Do not turn off the Power Switch on the Left Side of
the machine or open the Front Cover during copying/
printing.
If you are not going to use the machine for long
periods of time, turn OFF the Power Switch on the
Left Side of the machine and wait a few seconds then,
turn OFF the Main Power Switch on the Rear Side of
the machine.
printing.
If you are not going to use the machine for long
periods of time, turn OFF the Power Switch on the
Left Side of the machine and wait a few seconds then,
turn OFF the Main Power Switch on the Rear Side of
the machine.
■ Auto Reset Time
The initial setting for Auto Reset Time is 1 minute.
If you do not touch any key for 1 minute, the touch panel
display will be back to the initial screen of the active
function automatically. 20 seconds before resetting, the
“Continue” screen is displayed to extend the auto reset
time for another 1 minute.
If you wish to change Auto Reset Time, consult with
your Key Operator.
If you do not touch any key for 1 minute, the touch panel
display will be back to the initial screen of the active
function automatically. 20 seconds before resetting, the
“Continue” screen is displayed to extend the auto reset
time for another 1 minute.
If you wish to change Auto Reset Time, consult with
your Key Operator.
■ Dept. (Department) Code
When the Department Counter function is set up, the
Dept. (Department) Code input screen is displayed on
the Touch Panel Display. A registered Department Code
(1 to 8 digits) is required to gain access to each secured
function, or the secured Copy/Scanner function(s)
cannot be used. Please consult with the Key Operator
regarding the Department Code(s) for the desired
function.
Dept. (Department) Code input screen is displayed on
the Touch Panel Display. A registered Department Code
(1 to 8 digits) is required to gain access to each secured
function, or the secured Copy/Scanner function(s)
cannot be used. Please consult with the Key Operator
regarding the Department Code(s) for the desired
function.
How to enter the Dept. Code :
Input a registered department code (1 to 8 digits).
Press the Start key.
Press the Start key.
■ Maximum Copies Limitation
After setting the maximum allowed number of copies
for each department, consult with your Key Operator
when the total copy count reaches the designated limit
and the message appears on the Touch Panel Display.
for each department, consult with your Key Operator
when the total copy count reaches the designated limit
and the message appears on the Touch Panel Display.
2
1
■ Energy Saver (Power Save Mode, Sleep Mode)
You can set the machine to power save mode or sleep
mode while the machine is not in use. In power save
mode/sleep mode, the Energy Saver key flashes or
lights. Press the Energy Saver key to return the machine
to its former operating screen. For more details, refer to
General Settings (Key Operator) in the Operating
Instructions (For Function Parameters) on provided CD-
ROM.
● It is normal operation that the machine makes sounds
mode while the machine is not in use. In power save
mode/sleep mode, the Energy Saver key flashes or
lights. Press the Energy Saver key to return the machine
to its former operating screen. For more details, refer to
General Settings (Key Operator) in the Operating
Instructions (For Function Parameters) on provided CD-
ROM.
● It is normal operation that the machine makes sounds
when switching into power save mode.
Energy Saver key
Flashes: Power Save Mode
Lights : Sleep Mode
(Display will be unlit)
Power Switch
(Left Side)
(Left Side)
ON ( )
OFF (
)
Modes
Warm Up Time
Power Save Mode
Approx. 15 sec.
Sleep Mode
Approx. 15 sec.
■ PCMCIA/PC Card Slot
PCMCIA/PC Card Connector inside the PCMCIA/PC
Card Slot is not supplied by Limited Power Sources.
Card Slot is not supplied by Limited Power Sources.
■ Others
Panasonic is not responsible for data loss and any
consequence caused by computer virus infection or
external shocks.
consequence caused by computer virus infection or
external shocks.