Panasonic KX-MB2575 Operating Guide

To indicate the unit’s status, one or more of the following messages will appear on the display.

R There is something wrong with the unit. Contact our service personnel.

R There is something wrong with the drum cartridge. Replace the drum

cartridge.

R The toner cartridge is not inserted properly. Re-insert it correctly (page 19).
R There is something wrong with the toner cartridge. Replace the toner

cartridge.

R The toner cartridge or drum cartridge is not inserted properly. Re-insert it

R The document was not fed into the unit properly. Remove the document,

and then press MwN to clear the message. Re-insert the document. If
misfeeding occurs frequently, clean the document feeder rollers
(page 133) and try again.

R The ADF top cover is not fully closed. Push firmly on the front and rear edges

of the ADF top cover, and then feed the document again.

R The loaded recording paper is not the appropriate size. Load recording

paper of the size that is shown on the display.

R If this message is often displayed, also change the recording paper size

R The recording paper size setting (feature #380 on page 76) is set to “A5”,

“B5(ISO)”, “B5(JIS)” or “16K”, so received faxes will have been stored
into memory. Change the recording paper size setting and load the
appropriate recording paper.

Note:
R “#1”: Check the standard input tray. The displayed paper size depends on

the recording paper size setting (feature #380 on page 76).

R “#2”: Check the manual tray/multi-purpose tray. The displayed paper size

R “#3”: Check the lower input tray. The displayed paper size depends on the

R The paper input tray is not installed correctly. Pull out the paper input tray

and re-insert it.

Note:
R “#1”: Standard input tray

R Recording paper was not fed into the unit properly. Re-insert the recording

paper.

R If misfeeding occurs frequently, clean the pickup rollers (page 134) and try

again.

Note:
R “#1”: Standard input tray (page 33)
R “#2”: Manual tray/multi-purpose tray (page 35)
R “#3”: Lower input tray (page 106)

R The rear cover is open. Close it.

R The unit is cooling down the fuser unit. Wait for a while.

110