Panasonic KX-MB2575 Operating Guide

For information about configuring wireless LAN
settings, please refer to "3.7  Wireless LAN settings
y", page 26.

If the unit has already been connected to the wireless
network
1. [Easy Installation (Wireless LAN)]
2. Select [Already set up wireless LAN].

R The installation will start automatically.

3. When the setup program starts, follow the on-screen

instructions.
R Easy Print Utility (page 42) and Device Monitor

4. The [Select a Network Device] dialogue box

appears.
1. Check [Select from the search list] and select

the unit from the list.
R If the name of the desired unit is not displayed

on the list, and the IP address for the unit has
been assigned, check [Direct input] and
enter the IP address.

R You can change the name of the unit if

necessary.

3. Click [Install], then follow the on-screen

instructions.
R The files will be copied to your computer.

If the unit has not been connected to the wireless
network yet
1. [Easy Installation (Wireless LAN)]
2. Select [Not yet set up wireless LAN].

R The installation will start automatically.

Important:
R The USB cable is required for configuring

3. When the setup program starts, follow the on-screen

instructions.
R Easy Print Utility (page 42) and Device Monitor

4. The [Connect Device] dialogue box appears.

1. Connect the unit to a computer with the USB

cable, then click [Next].
R If the unit is connected to your computer, the

model name will be automatically detected.

R You can change the name of the unit if

necessary.

2. Click [Install], then follow the on-screen

instructions.
R The files will be copied to your computer.

5. When Wireless LAN Setting tool is launched, follow

the on-screen instructions to configure the wireless
LAN settings.

To view or install the operating instructions data
1. Start Windows and insert the supplied CD-ROM into

your CD-ROM drive.

2. Click [Operating Instructions], then follow the

on-screen instructions to view or install the operating
instructions in PDF format.
R Adobe

®

 Reader

®

 is required to view the operating

instructions.

Note:
R If you install the operating instructions, you can view

it anytime by clicking [Help] on the Multi-Function
Station launcher.

To use another unit with the computer
You need to add the printer driver for each unit, as
follows.
1. Start Windows and insert the supplied CD-ROM into

your CD-ROM drive.

2. [Modify] A [Add Multi-Function Station Driver].

Then follow the on-screen instructions.

Note:
R You cannot connect more than one unit to the same

computer at the same time (USB connection only).

To modify the software (To add or uninstall each
component)
You can select the components to install or uninstall
anytime after the installation.
You must be logged in as an administrator in order to
modify Multi-Function Station.
1. Start Windows and insert the supplied CD-ROM into

your CD-ROM drive.

2. [Modify] A [Modify Utilities]. Then follow the

on-screen instructions.

To uninstall the software
You must be logged in as an administrator in order to
uninstall Multi-Function Station.
[Start] A [All Programs] A [Panasonic] A the
unit’s name A [Uninstall]. Then follow the on-screen
instructions.

29