Panasonic KX-MB2575 Operating Guide

Note for recording paper:
R We recommend that you test paper (especially

special sizes and types of paper) on the unit before
purchasing large quantities.

R Do not use the following types of paper:

– Paper with cotton and/or fibre content that is over

20 %, such as letterhead paper or paper used for
resumes

– Extremely smooth or shiny paper, or paper that is

highly textured

– Coated, damaged or wrinkled paper
– Paper with foreign objects attached, such as tabs

or staples

– Paper that has dust, lint or oil stains
– Paper that will melt, vaporize, discolour, scorch

or emit dangerous fumes near 200 °C, such as
vellum paper. These materials may transfer onto
the fusing roller and cause damage.

– Moist paper
– Inkjet paper
– Chemically treated paper such as carbon or

carbonless duplicating paper

– Electrostatically charged paper
– Badly curled, creased or torn paper
– Paper with a coated surface

R Some paper is designed to be printed on only one

side. Try printing on the other side of the paper if you
are not happy with the print quality, or if misfeeding
occurs.

R For proper paper feeding and best print quality, we

recommend using long-grained paper.

R Do not use paper of different types or thicknesses at

the same time. This may cause paper jams.

R Do not re-use paper printed from this unit for another

printing job (including other copiers or printers). This
may cause paper jams.

R To avoid curling, do not open paper packs until you

are ready to use the paper. Store unused paper in the
original packaging, in a cool and dry location.

R For customers who live in high humidity areas:

Please be sure to store paper in an air-conditioned
room at all times. If you print using moist paper, it may
cause paper jam.

R For number of sheets the unit can load, see

R If you load more than the specified amount of paper,

a paper jam may occur and the paper may be
damaged.

R Depending on the type of paper, the loaded paper

may exceed the upper limit mark (

C

C

). In this case,

remove some paper from the tray.

R The unit is set for printing A4-size plain paper by

– To use other paper sizes, change the

– To use other paper types, change the

Pull the standard input tray (A) until it clicks into
place, and then lift the front part of the tray and pull it
completely out.

Before loading a stack of paper, fan the paper to
prevent paper jams.

32

4. . Recording Paper and Documents