Panasonic KXP1695 Manual
TechInfo Sheet
fax: 01344 853394
Data Products
email: data.technical@mail.panasonic.co.uk
Panasonic CS U.K.
Document No:
002
Model: KX-P1695
1
Product Group: Printers
Model: KX-P1695
Date: 25/09/98
Revision No: 1.0
Document No: 002
Subject: Changing top of form setting.
Question: How do I change the position of the first line of print in relation to the top of my page.
Answer:
Firstly you will need to have loaded the paper into your printer by using the Load/Park
facility from the bail release lever. Once the paper is inserted correctly use the following
combinations of buttons to advance or reverse the paper to the correct top of form setting:
facility from the bail release lever. Once the paper is inserted correctly use the following
combinations of buttons to advance or reverse the paper to the correct top of form setting:
+
To micro line feed forwards by holding each key down once
simultaneously.
+
To reverse micro line feed the paper by holding down each key
once
simultaneously.
By moving the paper installed in the printer using the above button combinations the top of
form setting is changed and stored electronically. To store the new setting use the following
button combination:
form setting is changed and stored electronically. To store the new setting use the following
button combination:
To enter Function mode, then to set top of form to the current
position.
position.
To exit press
N.B. When performing paper installation or adjusting the paper position please ensure that the
platen roller knob is not used, this setting can only be changed electronically via the front
panel.
panel.
ON LINE
FF
ON LINE
LF
FUNCTION
ON LINE
FUNCTION