Panasonic DPMB300EU Operating Guide
4. Printer
30
4.1.2 Printing on special media
You can print not only on plain paper but also on special
media (transparencies / labels).
media (transparencies / labels).
L
Please refer to page 99 for information on recording
paper.
paper.
L
To load paper, see page 13.
To print on transparencies
Use transparencies designed for laser printing.
We recommend the following:
Use transparencies designed for laser printing.
We recommend the following:
3M
®
CG3300/CG5000
L
Do not stack more than 25 transparencies at a
time.
time.
L
After printing, place transparencies on a flat
surface to cool and to prevent them from curling.
surface to cool and to prevent them from curling.
L
Do not re-use transparencies that have already been
fed through the unit. This includes transparencies
that have been fed through and ejected without being
printed on.
fed through the unit. This includes transparencies
that have been fed through and ejected without being
printed on.
L
Some types of transparencies have instructions
recommending which side to print on. If the print
quality is poor, try printing on the other side of a new
transparency.
recommending which side to print on. If the print
quality is poor, try printing on the other side of a new
transparency.
To print on labels
Use labels designed for laser printing. We recommend
the following:
Use labels designed for laser printing. We recommend
the following:
Avery
®
5160/5161/5162/5163/5164/5165/5167/5168
XEROX
®
LWH100/LWH110/LWH120/LWH130/LWH140
L
Make sure the print side is FACE UP when
loading the labels.
loading the labels.
L
Do not stack more than 25 labels at a time.
L
Do not use the following types of labels:
–
–
Labels that are wrinkled, damaged or separated
from the backing sheet.
from the backing sheet.
–
Any sheet of labels that has spaces in it where
some of the labels have been removed.
some of the labels have been removed.
–
Labels that do not completely cover the backing
sheet as follows:
sheet as follows:
4.2 Printing a received email
attachment automatically (LAN
connection only)
attachment automatically (LAN
connection only)
If you configure the POP server settings beforehand, the
unit will automatically print files attached to an email that
are sent from a compatible unit via the Internet (scan to
email print). This is useful if you want to print only
attached files, without checking your emails.
unit will automatically print files attached to an email that
are sent from a compatible unit via the Internet (scan to
email print). This is useful if you want to print only
attached files, without checking your emails.
Important:
L
The unit does not print email messages.
L
The unit will only print attached files sent from a
compatible unit, which can send emails directly
(without using a computer).
compatible unit, which can send emails directly
(without using a computer).
L
The attachment file formats that can be printed
are as follows:
–
are as follows:
–
TIFF
–
JPEG
–
PDF (Image type only. Such as files scanned
from the unit, or scanned from the computer
using Multi-Function Viewer.)
from the unit, or scanned from the computer
using Multi-Function Viewer.)
L
Received emails and the attached files will be
deleted automatically after printing.
deleted automatically after printing.
A Send from a compatible multi-function unit (Example:
“5.1.5 Scan to email address (LAN connection only)”,
page 33)
B Email is sent via the Internet (email server)
“5.1.5 Scan to email address (LAN connection only)”,
page 33)
B Email is sent via the Internet (email server)
C Receiving unit prints attached files
1
Start Multi-Function Station.
2
[
Utilities] i [Configuration Web Page] i
[
Network Configuration]
3
Type “root” as the user name, then enter the
password (feature #155 on page 56). i [OK]
password (feature #155 on page 56). i [OK]
4
Click the [SCAN TO EMAIL PRINT] tab.
5
Set each item.
To activate this feature:
Select [ENABLED] next to [SCAN TO EMAIL
PRINT]. i [Submit]
PRINT]. i [Submit]
To set the email server information:
1. Click [Edit] next to [EMAIL SERVER].
2. Enter the email server and POP server
information. i [Submit]
6
Close the web browser.
A
B
C