Panasonic DPMB300EU Operating Guide
8. Programmable Features
59
8.3 Fax features
Feature/Code
Selection
Changing the TEL/FAX
delayed ring count
{#}{
delayed ring count
{#}{
2}{1}{2}
If you use an extension telephone in TEL/FAX mode, select the desired number
of times the extension telephone rings before the unit answers the call.
{
of times the extension telephone rings before the unit answers the call.
{
1} “
1”
{
2} “
2” (default)
{
3} “
3”
{
4} “
4”
{
5} “
5”
{
6} “
6”
{
7} “
7”
{
8} “
8”
{
9} “
9”
Note:
L
See page 50 for details.
Erasing all items stored for
the one-touch dial and
navigator directory
{#}{
the one-touch dial and
navigator directory
{#}{
2}{8}{9}
{
0} “
NO” (default)
{
1} “
YES”
L
Disconnect the telephone line cord, USB cable and LAN cable before
activating this feature.
activating this feature.
To erase all items:
1. {
Y} i {#}{2}{8}{9}
2. Press {1} to select “
YES”. i {OK}
3. Press {1} to select “
YES”. i {OK} i {
Y}
Printing a sending report
{#}{
{#}{
4}{0}{1}
{
0} “
OFF”: Sending reports will not be printed.
{
1} “
ON”: A sending report will be printed after every fax transmission.
{
2} “
ERROR” (default): A sending report will be printed only when fax
transmission fails.
Setting the journal report to
print automatically
{#}{
print automatically
{#}{
4}{0}{2}
{
0} “
OFF”: The unit will not print a journal report, but will keep a record of the
last 30 fax transmissions and receptions.
{
{
1} “
ON” (default): The unit will print a journal report automatically after every
30 new fax transmissions and receptions (page 43).
Changing the receiving mode
in the manual answer setting
{#}{
in the manual answer setting
{#}{
4}{0}{4}
{
1} “
TEL” (default): Telephone mode (page 50)
{
2} “
TEL/FAX”: Telephone/Fax mode (page 50)
Sending documents
overseas
{#}{
overseas
{#}{
4}{1}{1}
If you cannot send a fax overseas even if the number is correct and the line is
connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission speed.
{
connected, activate this feature before sending the fax.
This feature improves the reliability by reducing the transmission speed.
{
0} “
OFF”: Deactivates this feature.
{
1} “
NEXT FAX”: This setting is effective only for the next attempted fax
transmission. After transmission, the unit will return to the previous setting.
{
{
2} “
ERROR” (default): When the previous fax transmission fails and you wish to
re-send the document.
Note:
L
This feature is not available for broadcast transmission.
L
Calling charges may be higher than usual.