Panasonic KX-MB2030 Operating Guide

MCopyN

MStopN

MStartN

* The pictured model is KX-MB2010.

If the MCopyN light is OFF, turn it ON by pressing
MCopyN.

If necessary, change the copy size (original
document size and recording paper size), resolution
and contrast according to the type of document.
R To select the copy size, see page 34.
R To select the resolution, see page 34.
R To select the contrast, see page 34.

If necessary, enter the number of copies (up to 99).

MStartN
R The unit will start copying.

After you finish copying, press MStopN to reset the
settings you set in step 3 and 4.

Note:
R To stop copying, see page 72.

R Make sure that the MCopyN light is ON.

Press MZoomN repeatedly to select the zoom rate that
fits the size of your document and recording paper.
– “ZOOM  =100%”

– “50%”
– “200%”
*1 Press MCN or MDN repeatedly to change the zoom

rate by 1 % at a time from “25%” to “400%”.
You can also enter the desired percentage

specifically by using the dial keys.

MSetN

If necessary, enter the number of copies (up to 99).
A MStartN

After you finish copying, press MStopN to reset this
feature.

Note:
R Zoom copy is not available for the following features:

– Quick ID copy feature (page 36)
– Image repeat feature (page 36)
– Poster feature (page 38)
– N in 1 feature (page 38)
– Separate N in 1 feature (page 39)

R You can hold the previous zoom setting (feature #468

R When using the scanner glass, the unit will only

enlarge the right top corner of the document starting
from the   mark on the unit.

R When using the automatic document feeder, the

unit will only enlarge the center of the upper part of
the document. To make an enlarged copy of the
bottom of the document, turn the document around,
and then make a copy (KX-MB2010/KX-MB2030
only).

35