Panasonic KX-MB2030 Operating Guide
6.1 Sending a fax manually
6.1.1 Using the scanner glass
By using the scanner glass, you can send a page from
booklets or small size paper.
booklets or small size paper.
MResolutionN
MContrastN
MRedialN
MFaxN
MStartN
MSetN
MQuick ScanN
1
If the MFaxN light is OFF, turn it ON by pressing
MFaxN.
MFaxN.
2
3
If necessary, change the resolution and contrast
according to the type of document.
R To select the resolution, see page 41.
R To select the contrast, see page 41.
according to the type of document.
R To select the resolution, see page 41.
R To select the contrast, see page 41.
4
Dial the fax number.
R To send a single page, go to step 7.
R To send multiple pages, go to the next step.
R To send a single page, go to step 7.
R To send multiple pages, go to the next step.
5
Press MQuick ScanN to scan the document into
memory.
R Wait until “SCAN:PRESS SET” “SEND:PRESS
memory.
R Wait until “SCAN:PRESS SET” “SEND:PRESS
START” is displayed.
6
Place the next page on the scanner glass. A MSetN
R To send more pages, repeat this step.
R To send more pages, repeat this step.
7
MStartN
Note:
R To stop sending, see page 72.
R You can change the default operation mode (feature
R To stop sending, see page 72.
R You can change the default operation mode (feature
#463 on page 58) and the timer before returning to
the default operation mode (feature #464 on
page 58).
the default operation mode (feature #464 on
page 58).
To select the resolution
1. Press MResolutionN repeatedly.
1. Press MResolutionN repeatedly.
– “STANDARD”: For normal-sized characters.
– “FINE”: For small-sized characters.
– “SUPER FINE”: For very small-sized characters.
– “PHOTO”: For photographs, shaded drawings,
– “FINE”: For small-sized characters.
– “SUPER FINE”: For very small-sized characters.
– “PHOTO”: For photographs, shaded drawings,
etc.
2. MSetN
R Using the “FINE”, “SUPER FINE” and “PHOTO”
R Using the “FINE”, “SUPER FINE” and “PHOTO”
settings will increase transmission time.
To select the contrast
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press MContrastN repeatedly. A MSetN
Adjust this setting depending on the darkness or
lightness of the document. 5 levels (low to high) are
available.
Press MContrastN repeatedly. A MSetN
Note:
R You can save the previous contrast setting (feature
R You can save the previous contrast setting (feature
To redial the last number
MRedialN
R If the line is busy, the unit will automatically redial the
MRedialN
R If the line is busy, the unit will automatically redial the
number 1 time.
Note:
R To stop sending, see page 72.
R To stop sending, see page 72.
Reserving the fax transmission (Dual Access)
You can reserve a fax transmission even when the unit
is just receiving a fax or sending a fax from memory.
– Up to 3 reservations when sending
– Up to 4 reservations when receiving
1. Set the original during fax reception or fax memory
You can reserve a fax transmission even when the unit
is just receiving a fax or sending a fax from memory.
– Up to 3 reservations when sending
– Up to 4 reservations when receiving
1. Set the original during fax reception or fax memory
transmission.
2. Enter the fax number using the dial keypad,
one-touch dial or phonebook.
3. When using the scanner glass, press MQuick
ScanN. The unit will scan 1 page. Place the next
document on the scanner glass and press MSetN.
Repeat this until all the documents are scanned, then
press MStartN.
When using the automatic document feeder,
press MStartN.
document on the scanner glass and press MSetN.
Repeat this until all the documents are scanned, then
press MStartN.
When using the automatic document feeder,
press MStartN.
R If the document exceeds the memory capacity, the
reservation for that document will be canceled. You
must send the entire document manually.
must send the entire document manually.
Printing a confirmation report
A confirmation report provides you with a printed record
of transmission results. To print the confirmation reports,
make sure that feature #401 is activated (page 59). For
an explanation of the messages, see page 73.
A confirmation report provides you with a printed record
of transmission results. To print the confirmation reports,
make sure that feature #401 is activated (page 59). For
an explanation of the messages, see page 73.
Printing a journal report
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see
page 96. To print it automatically after every 30 new
A journal report provides you with a printed record of the
30 most recent faxes. To print it manually, see
page 96. To print it automatically after every 30 new
41
6. . Fax (KX-MB2030 only)
6. Fax (KX-MB2030 only)