Panasonic KX-MB2030 Operating Guide

R When another person is adjusting stored data in the

unit, it may be overwritten. Make sure the unit is not
currently being used for the same function.

You can confirm the setting information and current
status of the unit from your computer.

Start Multi-Function Station.

[Utilities] A [Device Monitor]
R The [Device Monitor] window will appear.

Confirm the status of the unit.
[Status]: Current status of the unit

Note:
R Additional information (toner and recording paper

status, unit information, etc.) will be displayed in
[Status] tab by clicking [Advanced Information].

R You can update the status of the unit by clicking

[Refresh].

R If a printing error occurs, the Device Monitor will start

automatically and display the error information.

R For details, see the help file by selecting [ ] from

Multi-Function Station.

You can confirm the setting information and status of the
unit from the web browser.

Start Multi-Function Station. A [Utilities] A
[Configuration Web Page]
R You can also access the unit by entering its IP

address in a web browser.

Select a category from the menu bar.
[Status]: Toner and paper information, etc.
[Device]: Current status of the unit, etc.
[Network]: Network information, etc.
R When you select [Device] or [Network], you can

change which features are displayed by clicking
the feature tabs at the top of the right frame.

Confirm the status of the unit.

Note:
R You can update the status of the unit by clicking

[Reload].

You can cancel the current operation from the unit. You
can also select the desired operation to cancel.

MStopN
R “USER STOPPED” is displayed.
R If “USER STOPPED” is not displayed, go to step

To cancel printing:
Press MStopN repeatedly to display “STOP
PRINTING?”.

To cancel scanning (KX-MB2030 only):
Press MStopN repeatedly to display “STOP
SCANNING?”.

To cancel copying:
Press MStopN repeatedly to display “STOP
COPYING?”.

To cancel sending or receiving faxes
(KX-MB2030 only):
Press MStopN repeatedly to display “STOP FAX?”.

To cancel broadcast transmission (KX-MB2030
only):
Press MStopN repeatedly to display “BROAD
CANCELED?”.

To cancel fax redialing (KX-MB2030 only):
Press MStopN repeatedly to display “SEND
CANCELED?”.

MSetN

72