Panasonic KXHNS107 Operating Guide
Setup overview
1
Initial setup
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your
hub.
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your
hub.
2
Insert the battery
The sensor is battery powered.
The sensor is battery powered.
3
Registration
Required only if the sensor was
purchased separately (i.e., not as
part of a bundle).
Required only if the sensor was
purchased separately (i.e., not as
part of a bundle).
4
Confirm the installation area
Read the information in this
document to confirm that the
desired installation area is suitable
to proper operation.
Read the information in this
document to confirm that the
desired installation area is suitable
to proper operation.
5
Installation
Install the sensor in the desired
location.
Install the sensor in the desired
location.
Inserting the battery
R Use ONLY a CR2 Lithium battery.
R Confirm the polarities (
R Confirm the polarities (
,
).
1
Remove the front cover.
R Lift from the indented area (A)
R Lift from the indented area (A)
and remove the cover (B).
A
B
2
Insert the battery.
3
Attach the front cover.
For assistance, please visit http://shop.panasonic.com/support
9
Setup
HNS107_(en_en)_0120_ver.101.pdf 9
2017/01/20 21:11:39