Panasonic KX-PS8000 Manual

Unable to print more than
one area

Cannot find scanner

Check the cable connection for the
system. Close the Digital Duplicator Utility
window and turn off the system (scanner /
printer / computer), then turn it on again.

Scanner is not turned on or cable
connection is improper.

Cannot find scanner and
printer

Set the number of colors to 256 colors or
more.

Scanner and printer are not turned
on or cable connection is improper.

Cannot find printer.

Zoom function is not available when using
the ADF tray. Place the document on the
scanner glass and retry it.

Printer is not turned on or cable
connection is improper.

Digital Duplicator Utility
requires 256 colors or
higher

Turn off the system (scanner / printer /
computer), then turn it on again.

The number of displayed colors on
the monitor is less than 256 bit.

Cannot use more than
100% zoom when using
ADF

Check the connection and turn on the
scanner and/or printer. Click Retry on the
message window.

An image enlarged more than 100%
is being printed using the ADF tray.

No response from
scanner. Check the power
or cable. No response
from printer. Check the
power or cable.

Remove the document from the ADF tray,
place it on the scanner glass, then print.

Scanner or printer is not turned on
or cable connection is improper.

DCIS did not start
printing. Abort printing.

Delete the unnecessary images from the
Layout box

DCIS did not start duplicating.

Delete the unnecessary selection areas
from the Original box 

More than one selection area is
printed using the ADF tray.

Exceed 30 areas. Delete
other areas and try again.

More than 30 images are pasted on
the Layout box .

Exceed 10 areas. Delete
other areas and try again.

More than 10 selection areas are
created in the Original box .