Panasonic DMC-LX100 Operating Guide
193
SQW0024
Recording motion pictures
Recording motion pictures
●
If the surrounding temperature is high, or a motion picture is recorded continuously, [ ] is
displayed and recording may be stopped halfway through to protect the camera.
●
If Extra optical zoom is used before pressing the motion picture button, these settings will be
cleared, and the recordable area will be changed significantly.
●
Note that if you perform operations such as zoom, using buttons or dials, while recording a motion
picture, operation noise may be recorded.
●
The zoom speed will be slower than normal during motion picture recording.
●
The available recording time displayed on the screen may not decrease regularly.
●
Depending on the type of the card, the card access indication may appear for a while after
recording motion pictures. This is not a malfunction.
●
If you stop recording motion pictures too soon when you have set picture effect (Filter) of
[Miniature Effect], the camera may continue recording for a certain time. Hold the camera until the
camera stops recording.
●
[ISO Limit Set] is disabled when you are recording motion pictures.
●
Even if you set [Stabilizer] to [
] (Panning) when you are recording motion pictures, it is fixed to
[
] (Normal).
●
It is recommended to use a fully charged battery or an AC adaptor (optional) and DC coupler
(optional) when recording motion pictures.
●
If while recording motion pictures using the AC adaptor and the power supply is cut off due to a
power outage or if the AC adaptor is disconnected etc., the motion picture being recorded will not
be recorded.
Not available in the following cases:
●
Motion pictures cannot be recorded in the following cases:
•During panorama picture recording
•When the picture effect (Filter) is set ([Rough Monochrome], [Silky Monochrome], [Miniature
Effect]
*
, [Soft Focus], [Star Filter], [Sunshine])
*
Only when recording motion pictures with [Rec Quality] of [4K]
•When using [Time Lapse Shot]
•When using [Stop Motion Animation]