Panasonic KYR615AB Operating Guide
35
EN
English
Troubleshooting
Low Temperature Cooking Mode
Autoboil Mode
Symptom
Possible cause
Heating time takes too
long.
■
The base of the pan or top plate is dirty.
■
A lid has not been used.
■
Water was added to the pan during Autoboil Mode.
■
The lid is removed or the pan is moved during Autoboil
Mode.
■
Cookware with a non-stick coating may affect the
sensor detection. If the water is not boiled after the
beep, continue heating up as required.
■
Water has not
boiled after
beeping.
■
Water has boiled
but does not beep.
■
The cookware size and material (e.g. non-stick
coating) and the volume of water may affect the
sensor detection.
Select a power level as required.
No power - heating
does not start.
The top plate is too hot for Autoboil Mode. Autoboil Mode
will start automatically when the top plate has cooled
down.
Symptom
Possible cause
■
Preheating time
takes too long.
■
The actual
temperature is
different from the
set temperature.
■
Food is not
achieving set
temperature.
■
The pan has been moved away from Genius Sensor.
■
The base of the pan or top plate is dirty.
■
Water, oil, or food was added during preheating.
■
The temperature on the base of the pan may vary
from the set temperature depending on the type of
cookware.
■
Due to the variety of food types and pans, the actual
temperature of food may be different from the set
temperature.
■
Cookware with a non-stick coating may affect the
sensor detection.
Adjust the temperature as required with
slider.
No power - heating
does not start
The top plate is too hot for the temperature set. Heating
will start automatically when the top plate has cooled
down.