Panasonic CZCWEBC2 Operating Guide

36

  For a weekly timer, select a daily timer from the pulldown menu in the same way as with 

a daily timer. 

 

 Select a desired daily timer number (D1–D50, holiday, or special day 1–5) for each day of the week.

 

A maximum of 50 weekly timers can be set.

 For disabling input/changed data and returning to the original settings.
  Clicking on this button will enable the input settings and send them to the Web Interface. 

The input data will only be enabled after being sent.

 

 Setting data for each daily timer No. (D1, D2, . . .) must be sent each time the setting for the 
daily timer is completed. If you attempt to move to D2 setting while you are setting D1, for 
example, the error message “Send for each daily timer.” will be displayed, as shown below.

 
 

 If this message is displayed, click on the “Send” button to enable the setting, or click on 
the “Cancel” button to disable the setting then perform the setting for another daily timer 
No.

  The items for which operations with the remote controller are prohibited  can be 

confi rmed. 

 

When you click on this button, the screen shown below will be displayed. 

 

 You can only confi rm the prohibited items. You cannot change the setting. To change 
settings, see “Prohibiting remote control use”.

The setting temperature will be automatically set within the range of each air 
conditioner's upper and lower limit values during actual operation, as the upper and 
lower temperature limits vary depending on the indoor unit models. Setting for an 
item for which “Set time” is not set will be invalid.

Main      Sub