Panasonic KXTU329FX Operating Guide
Priority call procedure
1
Press and hold M N for 3 seconds, or press it 3 times when in
standby mode.
standby mode.
2
The phone sends your stored SMS message (page 33).
R To cancel sending an SMS message, press M
N.
3
The phone dials the 1st person in the list. Handsfree is turned
on.
on.
R To switch to the receiver, press M
N.
4
If the call is answered, you can begin your conversation. You
can skip to the next person by pressing M N for 3 seconds
while talking. Press M
can skip to the next person by pressing M N for 3 seconds
while talking. Press M
N to end the priority call.
OR
If the other party is busy, rejects the call, or does not
answer within 20 seconds, the phone automatically dials the
next person. The phone continues to send SMS messages and
dial numbers in the list in sequence, up to a maximum of 2
times.
If the other party is busy, rejects the call, or does not
answer within 20 seconds, the phone automatically dials the
next person. The phone continues to send SMS messages and
dial numbers in the list in sequence, up to a maximum of 2
times.
Note:
R You can stop the priority call sequence by pressing M
R You can stop the priority call sequence by pressing M
N while dialling. The sequence will
continue if you press and hold M
N again for 3 seconds within 1 minute after you press
M
N.
Storing a priority call number
1
Press MDN. a MbN: Select . a M N
2
MbN: “Call Settings” a M N
3
MbN: “Priority Call” a M N
4
MbN: “Call Number” a M N
5
MbN: Select the desired position in the call number list.
6
M N a MbN: “Manual Input” a M N
R To add a number from the contacts list:
MbN: “Add from List” a M
N a MbN: Select the desired contact. a M
N
R If you want to edit the stored number, select “Edit”.
32
Basic Operations
TU329FX(en)_1011_ver210.pdf 32
2016/10/11 14:54:17