Elac SUB 2040 ESP 35297 Leaflet
Product codes
35297
Universal, flexible, powerful bass: SUB 2040 ESP
The SUB 2040 ESP sets new standards in its class.
Driven by a powerful 300W-Class D amplifier, the
two woofers in push-push/pull-pull array generate
an enormously expressive and crisp bass. And this
practically without cabinet vibrations that would
impair the quality of sound reproduction. The facing
arrangement of the chassis means that the me-
chanical impulses that – in a conventional design –
are transmitted to the cabinet are almost completely
eliminated. In addition, the two drivers are coupled
by a massive connecting shaft.
The room-
tuning
circuit
ensures
optimal
adjustment
of the
subwoofer
to the
ambient
spatial
conditions.
This sys-
tem is
universally connectible: Up to three (!) loudspeaker inputs can be used in
parallel (e.g. left, right and centre), while simultaneously connecting the
surround receiver’s LFE input. As a result – virtually independent of the
surround receiver’s bass management settings – optimum bass reproduc-
tion is assured, whether in stereo or surround mode.
The crossover frequency of the main speakers is infinitely adjustable, thereby maximising flexibility. To compensate
for phase differences between the satellite speakers and the subwoofer, which can be the result of differing spatial
arrangements, the subwoofer is equipped with a
phase switch.
Driver equipment:
2x 200mm AS woofers
Electronic features:
- Class-D digital amplifier with 300W peak power,
parallel (e.g. left, right and centre), while simultaneously connecting the
surround receiver’s LFE input. As a result – virtually independent of the
surround receiver’s bass management settings – optimum bass reproduc-
tion is assured, whether in stereo or surround mode.
The crossover frequency of the main speakers is infinitely adjustable, thereby maximising flexibility. To compensate
for phase differences between the satellite speakers and the subwoofer, which can be the result of differing spatial
arrangements, the subwoofer is equipped with a
phase switch.
Driver equipment:
2x 200mm AS woofers
Electronic features:
- Class-D digital amplifier with 300W peak power,
controlled by 4
th
order filters with ESP, assuring
complete harmonisation of drive units, power ampli-
fier and cabinet.
fier and cabinet.
- Room-tuning circuit (adjustable notch filter) for
specific elimination of room resonances.
- Adjustable volume and crossover frequency.
- Standby-mode (indicated by red LED on the back)
- Standby-mode (indicated by red LED on the back)
with power consumption less than 5 W.
- Polarity switching 0° / 180°.
- Automatic on/off switch with approx. 15 min. switch-
- Automatic on/off switch with approx. 15 min. switch-
off delay.