Panasonic KX-HCM10 Specification Guide
Design and specifications are subject to change without notice. KME1101EU-0000-01 Printed in Japan
Sensor Input
External device control
Ethernet
Power
Ceiling Mount
Wall Mount
Desktop
Network Connection:
Mounting:
Accessories:
Weight:
Dimensions (Hx Wx D):
Humidity:
Operation Temperature:
Consumption:
Voltage:
10Base-T (RJ-45) x 1
Wall mount, desk/ceiling mount, tripod mount
AC Adaptor, Stand, 2 Screws
370 g
116 mm x 115 mm x 72 mm
20-80% RHG, non-condensing
5-40
Wall mount, desk/ceiling mount, tripod mount
AC Adaptor, Stand, 2 Screws
370 g
116 mm x 115 mm x 72 mm
20-80% RHG, non-condensing
5-40
o
C, indoor only
8 W
AC Adaptor Input: AC 100-240 V
Output: 9 VDC
AC Adaptor Input: AC 100-240 V
Output: 9 VDC
Pan:
Tilt:
Image Sensor:
Number of Pixels:
Horizontal View Angle:
White Balance:
Focus:
Caliber Ratio:
Exposure:
Illumination:
60
o
left and right
0-45
o
down
CMOS, 1/3 inch
320,000 pixels
45
320,000 pixels
45
o
Auto/Manual
Fixed, 1m-infinity
F1.8
Auto
10-10,000 lux
Fixed, 1m-infinity
F1.8
Auto
10-10,000 lux
Video Resolution:
Video Compression:
Magnification:
Frame Rate:
Security:
Trigger of Image
Transfer:
Image transfer protocol:
Message Contents:
Image Buffer:
Upgrade:
Sensor I/O Connector:
Memory:
Max Bandwidth
Control:
640 x 480, 320 x 240(default), 160 x 120
JPEG/3 Levels
100% or 150%
Max. 7.5 frames/sec. (640 x 480)
Max. 15 frames/sec. (320 x 240)
Max. 15 frames/sec. (160 x 120)
Administrator or User password protection
Time: (Day of the week, Hour, Minute, Second)
Alarm-event (Sensor Input)
JPEG/3 Levels
100% or 150%
Max. 7.5 frames/sec. (640 x 480)
Max. 15 frames/sec. (320 x 240)
Max. 15 frames/sec. (160 x 120)
Administrator or User password protection
Time: (Day of the week, Hour, Minute, Second)
Alarm-event (Sensor Input)
*
1
SMTP
Personalized message
About 80 Frames (320 x 240) with time display
Via Internet connection
Sensor Input
External device control
2 Mbyte RAM, 2 Mbyte Flash ROM
Personalized message
About 80 Frames (320 x 240) with time display
Via Internet connection
Sensor Input
External device control
2 Mbyte RAM, 2 Mbyte Flash ROM
0.1 Mbps-Unlimited
Specifications
Operating System:
Network Protocol:
Web Browser:
System Requirements For PC Control
Windows
®
95, Windows
®
98, Windows NT
®
4.0 or
Windows
®
2000, Windows
®
XP, Windows
®
Me
HTTP, FTP, TCP, UDP, IP, ARP, ICMP, DHCP, DNS
Microsoft
Microsoft
®
Internet Explorer 5.0 or later
Network Camera
KX-HCM10
Note:
Microsoft
®
, Windows
®
, Windows NT
®
and Windows
®
Me are either registered trademarks or
trademarks of Microsoft Corporation in the United States and / or other countries.
Windows
®
is Microsoft
®
Windows
®
operating system.
Windows NT
®
is Microsoft
®
Windows NT
®
operating system.
All trademarks referred to in this catalog are the property of their respective companies.
A sensor must be attached to the Network Camera in order to perform alarm function.
The remote monitoring via the Internet requires Static Global Address from your Internet provider.
PPPoE connection requires a suitable router. For connecting via the Internet, it is necessary to use
functions (port forwarding etc.) such as a router to access the camera from the Internet.
Refer to the instructions of the router.
*
2
*
1