Panasonic KXFLM653EX Operating Guide

–

Up to 3 reservations when sending

–

Up to 4 reservations when receiving

1. Insert the document during fax reception or 

fax memory transmission.

2. Enter the fax number using the dial keypad, 

one-touch dial or navigator directory.

3. Press {SCAN} or {FAX START}.

L

The document will be fed into the unit and 
scanned into memory. The unit will then send 
the data. If the document exceeds the 
memory capacity, transmission will be 
cancelled. You must send the entire 
document manually.

A sending report provides you with a printed 
record of transmission results. To print sending 
reports, make sure feature #401 is activated 
(page 53). For an explanation of error messages, 
see page 57.

A journal report provides you with a printed 
record of the 30 most recent faxes. To print 
manually, see page 75. To print automatically 
after every 30 new fax transmissions and 
receptions, make sure feature #402 is activated 
(page 53). For an explanation of error messages, 
see page 57.

L

Shaded area will be scanned.

L

Single sheet:
45 g/m

2

 to 90 g/m

2

L

Multiple sheets:
60 g/m

2

 to 80 g/m

2

L

Remove clips, staples or other fasteners.

L

Do not set the following types of documents: 
(Make a copy of the document and set the 
copy.)
–

Chemically treated paper such as carbon 
or carbonless duplicating paper

–

Electrostatically charged paper

–

Badly curled, creased or torn paper

–

Paper with a coated surface

–

Paper with a faint image

–

Paper with printing on the opposite side 
that can be seen through the other side, 
such as newsprint

L

Check that ink, paste or correction fluid has 
dried completely.

L

To set a document with a width of less than 
210 mm, we recommend using a copy 
machine to copy the original document onto 
A4 or letter-sized paper, then setting the 
copied document.

128 mm

128 mm

600 mm 

216 mm

216 mm

208 mm

 4 mm

 4 mm

 4 mm

 4 mm

FLM653EX-PFQX2377ZA-en.book  Page 31  Tuesday, December 20, 2005  8:55 AM