Panasonic KXP7500 Operating Guide
159
Options
•
2nd feeder
To install a 2nd feeder:
1
Place the 2nd feeder on a solid table or cart.
2
Carefully place the printer on top of the 2nd feeder.
Make sure the connector is properly inserted.
Make sure there is no gap and a deviation between the printer and the 2nd feeder.
Make sure there is no gap and a deviation between the printer and the 2nd feeder.
C
AUTION
•
The printer weighs approximately 17 k
g
{37.4 lbs.}.
The back of the printer should be facing you when
you move it.
you move it.
3
Reconnect all cables to the back of the printer.
4
Reconnect the power cord to the printer.
5
Make sure the “
READY
” message appears on the operator panel display.
Kit contents
Printer
2nd feeder
Connector