Panasonic KXTCD300FX Operating Guide
Preparation
12
Setting the date and time
Important:
L
Confirm that the AC adaptor is connected.
L
Ensure that w is not flashing. If the
handset is in screen saver mode, w is not
displayed. Press {ih} to turn the
display on.
handset is in screen saver mode, w is not
displayed. Press {ih} to turn the
display on.
1
Press $ (middle soft key).
2
Select b, then press ,.
3
Select “Set Date & Time”, then press
,
,
.
4
Enter the current day, month and year by
selecting 2 digits for each.
Example: 17 May, 2004
selecting 2 digits for each.
Example: 17 May, 2004
Press {1}{7} {0}{5} {0}{4}.
5
Enter the current hour and minute by
selecting 2 digits for each.
selecting 2 digits for each.
L
You can select “AM”, “PM” or 24-hour
time entry by pressing {*} repeatedly.
time entry by pressing {*} repeatedly.
Example: 3:30 PM
Press {0}{3} {3}{0}, then press {*}
repeatedly until “03:30 PM” is
displayed.
repeatedly until “03:30 PM” is
displayed.
6
Press ,.
7
Press {ih}.
Note:
L
To correct a digit, press {<} or {>} to
move the cursor, then make the
correction.
move the cursor, then make the
correction.
L
The date and time may be incorrect after a
power failure. In this case, set the date
and time again.
power failure. In this case, set the date
and time again.
TCD300FX(e).book Page 12 Monday, October 25, 2004 9:56 AM