Panasonic KXTS730S Operating Guide
Programmable Settings
For assistance, please visit http://www.panasonic.com/consumersupport
17
Programming via direct commands
You can program features using “direct commands”– special codes that take you directly
to the feature you wish to program and allow you to select the desired setting. There is no
need to scroll through the unit’s sub-menus.
Details of each feature can be found on the corresponding pages.
to the feature you wish to program and allow you to select the desired setting. There is no
need to scroll through the unit’s sub-menus.
Details of each feature can be found on the corresponding pages.
Important:
L
Before programming, make sure the unit is not being used.
1
Press {MENU} ({F2} key).
2
Press {#}.
3
Enter the desired feature code (shown below).
4
Enter the desired setting code (shown below).
L
This step may vary depending on the feature being programmed.
5
Press {SAVE} ({F3} key).
6
Press {STOP} to exit programming mode.
Note:
L
If the unit beeps 5 times, you entered an invalid code. Enter the correct code.
L
If you make a mistake or enter the wrong code, press {CLEAR}.
Direct commands chart
Note:
L
The default settings are indicated by *.
Feature
Feature code
Setting code
Page
Ringer volume
{
1} {6} {0}
{
1}: Low {2}: Medium
{
3}: High* {0}: Off
Ringer tone
{
1} {6} {1}
{
1}–{3}: Tone pattern 1*–3 page 19
LCD contrast
{
1} {4} {5}
{
1}–{6}: Level 1–6
(Default: 3)
Key tone
{
1} {6} {5}
{
1}: On* {0}: Off
Caller ID number auto edit
{
2} {1} {4}
{
1}: On* {0}: Off
Set dial mode
{
1} {2} {0}
{
1}: Pulse {2}: Tone*
:
Enter direct No.
BACK
TS730S.book 17 ページ ２００５年６月３日 金曜日 午前９時５８分