Panasonic KXTGC310FX Operating Guide
“Česká rep.” = Czech
“Slovensko” = Slovakia
“Slovensko” = Slovakia
3
MbN: “Yes” a MOKN a M
N
Note:
R Changing the unit’s region setting may
R Changing the unit’s region setting may
cause the settings for your country or your
customised settings to return to their default
settings.
customised settings to return to their default
settings.
Increasing the range of the base
unit
unit
You can increase the signal range of the base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 3. Contact your Panasonic dealer for
details.
Important:
R Before registering the repeater to this base
unit by using a DECT repeater. Please use
only the Panasonic DECT repeater noted on
page 3. Contact your Panasonic dealer for
details.
Important:
R Before registering the repeater to this base
unit, you must turn the repeater mode on.
R Do not use more than one repeater at a
time.
Setting the repeater mode
1
M
N#138
2
MbN: Select the desired setting. a MOKN
a M
a M
N
Registering the DECT repeater
(KX-A405/KX-A406) to the base unit
(KX-A405/KX-A406) to the base unit
Note:
R Please use a repeater that has not yet been
R Please use a repeater that has not yet been
registered to another unit. If the repeater is
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
registered to another unit, deregister it first,
referring to the Installation Guide for the
DECT repeater.
1
Base unit:
Press and hold M
Press and hold M
N for about 5 seconds.
2
DECT repeater:
Connect the AC adaptor, then wait until
the
Connect the AC adaptor, then wait until
the
indicator and
indicator light
green.
3
Base unit:
To exit the registration mode, press M
To exit the registration mode, press M
N.
24
Programming
TGC310FX(en)_0331_ver002..pdf 24
2015/03/31 19:31:19