Panasonic KXHNK102FX Operating Guide
Indicator
Status
Red, blinking
Remote is out of
range of the hub, or
could not
communicate with
the hub
range of the hub, or
could not
communicate with
the hub
Green,
blinking slowly
blinking slowly
Registration mode
(you pressed and
held M
(you pressed and
held M
N)
Repeating
pattern of
blinking green
and blinking
red
pattern of
blinking green
and blinking
red
Low battery
*1 The LED lights for about 2
seconds after a button is pressed,
then turns off. If the LED indicator
does not light when you press a
button, the battery must be
replaced.
then turns off. If the LED indicator
does not light when you press a
button, the battery must be
replaced.
*2 The LED indicator does not
Setup overview
1
Initial setup
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your
hub.
Make sure you can access the
system using your mobile device.
For details, refer to the System
Setup Guide included with your
hub.
2
Insert the battery
The remote is battery powered.
The remote is battery powered.
3
Registration
Required only if the remote was
purchased separately (i.e., not as
part of a bundle).
Required only if the remote was
purchased separately (i.e., not as
part of a bundle).
4
Confirm the usage area
Read the information in this
document to confirm that the
desired usage area is suitable to
proper operation.
Read the information in this
document to confirm that the
desired usage area is suitable to
proper operation.
9
Setup