Panasonic KX-PS8000 Installation Guide
(1.1.3)Use Netware ver5.0 with NDPS with Pserver mode, IPX/SPX protocol,
NDS.
NDS.
After installing the Ethernet card, please follow the below two major setup procedures.
(1.1.3.1) Setting up the Pserver.
(1.1.3.2) Setting up the printer settings in the server Netware ver5.0.
(1.1.3.3) Setting up the Client Computer. (Windows95 or Windows98).
(1.1.3.1)Setting up the Pserver.
Please follow the procedure described in (1.1.1.1) Setting up the printer settings in Netware
ver5.0 file Server.
(1.1.3.2)Setting up the printer settings in the server Netware ver5.0.
Set up your Client PC in advance so that you can login the server in NDS mode as the
printer settings is done mostly on the Client PC. Please refer to Netware online manual for
more detail.
1.Start the Netware server.
2.Start your client PC (Windows95 or Windows98). Login to the server in NDS mode as the
Supervisor(Admin).
3.Install NDPS product on the server side if it is not installed.
Click Novell on the graphical console screen (X Server – Graphical Console) and select
Install.
Confirm NDPS product is included in the Install Products screen.
If not, click New Products
and follow the instruction on the screen.
4.Confirm NDPS Broker is launched.
If NDPS product is installed, it is automatically launched. Confirm it at the server side by
pressing Ctrl + Esc key.
5.Launch NetWare Administrator. You can do so by clicking on NWADMIN icon in the
NetWare Tools group in Windows.