KTI Networks KSC-200 KSC-200C Leaflet
Product codes
KSC-200C
111209
Specifications:
Industrial Optically Isolated Serial RS-232
to Fiber Converter
The converter is designed to provide the most versatile connection possible between 2 RS-232
serial equipment using fiber optic cable. It allows any two pieces of serial equipment to
communicate full-duplex over typical duplex fibers, or over optional single fiber up to 20km. The
converter supports transparent conversion for not only RS-232 data lines, but also all RS-232
control signals. It also supports all RS-232 baud rates with no need for user configuration. The
DIN-Rail mountable design makes it ideal for industrial cabinets and enclosures. Further, more
designs such as signal protection, wide operating temperature range, wide power voltage range are
also provided to suit for more industrial applications.
serial equipment using fiber optic cable. It allows any two pieces of serial equipment to
communicate full-duplex over typical duplex fibers, or over optional single fiber up to 20km. The
converter supports transparent conversion for not only RS-232 data lines, but also all RS-232
control signals. It also supports all RS-232 baud rates with no need for user configuration. The
DIN-Rail mountable design makes it ideal for industrial cabinets and enclosures. Further, more
designs such as signal protection, wide operating temperature range, wide power voltage range are
also provided to suit for more industrial applications.
Key Features:
Transparent conversion for all RS-232 signals
Supports RS-232 baud rate higher than 115.2Kbps
Auto adaptation and conversion to any RS-232 baud received
Operation with no required configuration
Extending all RS-232 signals over long optical cables
Supports versatile optical cables:
- ST/SC multimode duplex fibers
- SC single mode duplex fibers
- SC single mode single fiber
- SC single mode duplex fibers
- SC single mode single fiber
Provides surge protection (transient voltage) on RS-232 signals
Provides high ESD protection on RS-232 signals
Provides optical isolation between RS-232 and main circuitry
Designed for industrial environments with:
- RS-232 surge, ESD, and isolation protection
- DIN-Rail and panel mounting support
- Wide power voltage range support
- Terminal block and Jack-type power connectors
- Wide operating temperature range
- Alarm relay output for device power failure
- Industrial-rated emission and immunity performance
- DIN-Rail and panel mounting support
- Wide power voltage range support
- Terminal block and Jack-type power connectors
- Wide operating temperature range
- Alarm relay output for device power failure
- Industrial-rated emission and immunity performance
RS-232 Interface
Connector
Connector
DB9 Female
Pin Assignments
DCE
Signals
TxD, RxD, RTS, CTS, DTR, DSR, DCD, RI, GND
Data Rate
0 ~ 115.2Kbps
Surge Protection
Transient Overvoltage outside +/-28V
Line ESD Protection
+/-15KV
Isolation
Optical isolation between RS-232 and main circuit, 3000 VDC rms
Far End Fault support
KSC-200
Product Highlights:
Transparent conversion
Surge protection
High ESD protection
Optical isolation
Versatile optical cables support
DIN-Rail mounting
Wide temperature range
Wide power voltage range
DIN-Rail Mounting
KC-4DR
KC-4DR
Panel Mounting Bracket
PMB-400
PMB-400