Panasonic KXHNH100E Operating Guide
Other programming
Changing the handset name
You can customise the name of your handset.
This can help you easily identify handsets
when making intercom calls, transferring calls
to other handsets, etc. You can select whether
or not the handset name is displayed in
standby mode. The default setting is “No”. If
you select “Yes” without entering any handset
name, “Handset 1” to “Handset 6” is
displayed.
This can help you easily identify handsets
when making intercom calls, transferring calls
to other handsets, etc. You can select whether
or not the handset name is displayed in
standby mode. The default setting is “No”. If
you select “Yes” without entering any handset
name, “Handset 1” to “Handset 6” is
displayed.
1
M
N#104
2
Enter the desired name (10 characters
max.). a MOKN
max.). a MOKN
3
MbN: Select the desired setting. a MOKN
2 times a MeN
2 times a MeN
Call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
dialling certain numbers. You can assign up to
6 phone numbers to be restricted, and select
which handsets are to be restricted. Storing
area codes here prevents the restricted
handsets from dialling any phone number in
that area code.
1
M
N#256
2
Enter the hub PIN (default: “0000”).
R If you forget your PIN, see page 49.
R If you forget your PIN, see page 49.
3
MbN: Select the desired unit. a M N
R All handsets registered to the hub are
R All handsets registered to the hub are
displayed.
R “ ” is displayed next to the selected
handset numbers.
R To cancel a selected handset, press
M N again. “ ” disappears.
4
MOKN
5
Select a memory location by pressing 1
to 6. a MOKN
to 6. a MOKN
6
Enter the phone number or area code to
be restricted (8 digits max.). a MOKN a
MeN
be restricted (8 digits max.). a MOKN a
MeN
Note:
R You can also select your mobile device in
R You can also select your mobile device in
this feature using a handset, if your mobile
device is registered to the hub. For more
information, refer to the User’s Guide
(page 43).
device is registered to the hub. For more
information, refer to the User’s Guide
(page 43).
Changing the hub PIN
Important:
R If you change the hub PIN (Personal
R If you change the hub PIN (Personal
Identification Number), please make note of
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 49.
your new PIN. The unit will not reveal the
PIN to you. If you forget your PIN, see
page 49.
1
M
N#132
2
Enter the current 4-digit hub PIN (default:
“0000”).
“0000”).
3
Enter the new 4-digit hub PIN. a MOKN
4
MbN: “Yes” a MOKN a MeN
Registering a handset to the hub
If for some reason the handset is not
registered to the hub (for example,
registered to the hub (for example,
is
displayed even when the handset is near the
hub), re-register the handset.
hub), re-register the handset.
1
Handset:
M
M
N#130
2
Hub:
Press and hold M
Press and hold M
A HANDSET/
LOCATORN until the LED indicator blinks
slowly in green.
R If all registered handsets start ringing,
slowly in green.
R If all registered handsets start ringing,
press M
A HANDSET/LOCATORN
again to stop, then repeat this step.
3
Handset:
MOKN a Wait until “Hub PIN” is
displayed. a Enter the hub PIN (default:
“0000”). a MOKN
R If you forget hub PIN, see page 49.
MOKN a Wait until “Hub PIN” is
displayed. a Enter the hub PIN (default:
“0000”). a MOKN
R If you forget hub PIN, see page 49.
Deregistering a handset
A handset can cancel its own registration to
the hub, or other handsets registered to the
the hub, or other handsets registered to the
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
31
Programming
HNH100E_(en_en)_1228_ver.103.pdf 31
2016/12/28 11:09:40