Panasonic KXHNC800E Operating Guide
Connections
1
Insert the AC adaptor plug
(A) firmly into the camera’s
micro-USB connector.
(A) firmly into the camera’s
micro-USB connector.
2
Connect the AC adaptor (B)
to the power outlet.
to the power outlet.
3
Insert a microSD card
(user-supplied; C) into the
camera’s microSD card slot.
(This is not necessary if you
do not want to record camera
images.)
(user-supplied; C) into the
camera’s microSD card slot.
(This is not necessary if you
do not want to record camera
images.)
B
C
A
Note:
R Use only the supplied AC adaptor S006AKB0500100.
R To remove the microSD card, push in the microSD card and then
R Use only the supplied AC adaptor S006AKB0500100.
R To remove the microSD card, push in the microSD card and then
remove it.
Note about power connections
AC adaptor connection
R The AC adaptor must remain connected at all times. (It is normal for
R The AC adaptor must remain connected at all times. (It is normal for
the adaptor to feel warm during use.)
R The AC adaptor should be connected to a vertically oriented or
floor-mounted AC outlet. Do not connect the AC adaptor to a
horizontally oriented AC outlet that faces the floor, such as an AC
outlet installed on a ceiling or under a table, as the weight of the
adaptor may cause the adaptor to become disconnected.
horizontally oriented AC outlet that faces the floor, such as an AC
outlet installed on a ceiling or under a table, as the weight of the
adaptor may cause the adaptor to become disconnected.
Helpline Tel. No.: U.K. 0330 3331112 Ireland 01 4475228
17
Setup
HNC800E_(en_en)_0222_ver.101.pdf 17
2017/02/22 13:28:38