Panasonic KXFLB853EX Operating Guide

This unit has 3 pieces of output tray. As a default 
setting, printed paper is stacked on the output 
tray as follows.
–

Upper output tray (“

#1”): Printed document 

by using the computer and copied document.

–

Lower output tray (“

#3”): Received fax 

document.

L

You can change the output tray setting for 
faxing (feature #441 on page 68) and for 
copying (feature #466 on page 70). You can 
also select the middle output tray (“

#2”).

To change the output tray from the computer, 
set the printer properties. See page 53, 59 for 
details.

Attach the tray label (

1) to the output tray (2).

L

Label 1 to the upper output tray (“

#1”)

L

Label 2 to the middle output tray (“

#2”)

L

Label 3 to the lower output tray (“

#3”)

L

Instead of the label 1, 2, 3, you can also 
attach other labels for print, copy or fax 
according to the usage. For a blank label, this 
is convenient if the optional LAN board is 
installed. You can write the user name on the 
blank label and attached it to the selected 
output tray.

Insert the output tray (

1) into the slots (2), then 

push the tray down until it latches into place.

L

Repeat this step to install other output trays.

L

Make sure that the number on the label and 
the tray position match.

L

Do not place the unit in an area where the 
output tray may be easily bumped into.

L

The upper output tray can hold up to 
approximately 100 sheets of printed paper. 
The other output trays can hold up to 
approximately 50 sheets of printed paper. 
Remove the printed paper before the output 
tray becomes full.

1

2

2

1

FLB853EX-PFQX2373ZB-en.book  Page 17  Tuesday, February 21, 2006  7:09 PM