Panasonic KXFLB853EX Operating Guide
8. Programmable Features
66
{#}{
4}{6}{3} Setting the default operation
mode
DEFAULT MODE
=COPY
[V^]
To select the default operation mode when the
selected time of the mode timer (feature #464)
passes.
{
selected time of the mode timer (feature #464)
passes.
{
1} “
COPY” (default): Copy mode is selected as
default.
{
{
2} “
FAX”: Fax mode is selected as default.
Note:
L
You cannot select the scan mode using this
feature.
feature.
{#}{
4}{6}{4} Setting the default operation
mode timer
MODE TIMER
=1min
[V^]
To set the timer before returning to the default
operation mode (feature #463).
{
operation mode (feature #463).
{
0} “
OFF”: Deactivates this feature.
{
1} “
30s”: 30 seconds
{
2} “
1min” (default): 1 minute
{
3} “
2min”: 2 minutes
{
4} “
5min”: 5 minutes
{#}{
4}{8}{2} Setting toner save feature
TONER SAVE
=OFF
[V^]
{
0} “
OFF” (default): Deactivates this feature.
{
1} “
ON”: The toner cartridge will last longer.
Note:
L
This feature may lower the print quality by
reducing toner consumption.
reducing toner consumption.
8.4 Fax features
{#}{
2}{1}{2} Changing the TEL/FAX delayed
ring setting
TEL/FAX RING
RINGS=2
[V^]
If you use an extension telephone in TEL/FAX
mode, select the desired number of times the
extension telephone rings before the unit
answers the call.
{
mode, select the desired number of times the
extension telephone rings before the unit
answers the call.
{
2} “
2” (default)
{
3} “
3”
{
4} “
4”
Note:
L
See page 40 for details.
{#}{
4}{0}{1} Printing a sending report
SENDING REPORT
=ERROR
[V^]
To print a sending report for fax transmission
results (page 33).
{
results (page 33).
{
0} “
OFF”: Sending reports will not be printed.
{
1} “
ON”: A sending report will be printed after
every transmission.
{
{
2} “
ERROR” (default): A sending report will be
printed only when fax transmission fails.
{#}{
4}{0}{2} Setting the journal report to
print automatically
AUTO JOURNAL
=ON
[V^]
{
0} “
OFF”: The unit will not print a journal report,
but will keep a record of the last 30 fax
transmissions and receptions.
{
transmissions and receptions.
{
1} “
ON” (default): The unit will print a journal
report automatically after every 30 new fax
transmissions and receptions (page 33).
transmissions and receptions (page 33).
{#}{
4}{0}{4} Changing the receiving mode
in the manual answer setting
MANUAL ANSWER
=TEL
[V^]
{
1} “
TEL” (default): Telephone mode (page 39)
{
2} “
TEL/FAX”: Telephone/Fax mode (page 40)
{#}{
4}{1}{1} Sending documents overseas
OVERSEAS MODE
=ERROR
[V^]
If you cannot send a fax overseas even if the
number is correct and the line is connected,
activate this feature before sending the fax.
number is correct and the line is connected,
activate this feature before sending the fax.
FLB853EX-PFQX2373ZB-en.book Page 66 Tuesday, February 21, 2006 7:09 PM