Panasonic KXFP155GRW Quick Setup Guide
To the single
telephone line jack
telephone line jack
To the power outlet
(220–240 V, 50 Hz)
(220–240 V, 50 Hz)
Telephone
line cord
line cord
Side to be printed
face down.
face down.
Power cord
Insert the
paper tray.
paper tray.
Tabs
Slits
Up to 50 sheets
Tension
plate
plate
Connect to “LINE”.
Handset cord
Metal bar: prevents the printed
paper from curling. Do not remove
the bar.
paper from curling. Do not remove
the bar.
1
Adjust the width of the
document guides.
document guides.
2
Insert the document (up to
10 pages) FACE DOWN.
10 pages) FACE DOWN.
3
■
Sending a fax manually:
Dial the fax number, then
press
Dial the fax number, then
press
j
.
■
Sending a fax using the
directory:
Press
directory:
Press
)
then press
+
or
-
until the desired entry is displayed and press
j
.
●
To program the desired names and telephone
numbers into the directory, see the operating
instructions.
numbers into the directory, see the operating
instructions.
■
Making a copy:
Press
Press
f
. (If necessary, enter the number of
copies.) Press
y
.
●
Check installation by making a call or making a
copy. If you do not hear a dial tone and cannot
make a call (as on a normal phone) or cannot make
a copy, please check the operating instructions.
copy. If you do not hear a dial tone and cannot
make a call (as on a normal phone) or cannot make
a copy, please check the operating instructions.
Quick Start Sheet
Recording your own greeting message
1
Press
t
2 times.
2
Press
w
.
3
Speak clearly about 20 cm away from the
microphone within 16 seconds.
microphone within 16 seconds.
4
When finished recording, press
{
.
Built-in answering device
(KX-FP155 only)
Listening to recorded incoming messages
■
When the MESSAGE light flashes,
press
press
LM
.
●
The new messages will be played.
■
When the MESSAGE light is on,
press
press
LM
.
●
All the messages will be played.
Thank you for purchasing a Panasonic facsimile.
See the operating instructions for details.
See the operating instructions for details.
Setup & Connections
Fax & Copy
KX-FP151GR
Model No.
KX-FP155GR
1
Press
l
.
2
Press
(
or
)
until the following is displayed.
3
Press
w
.
●
The unit will print the set up information.
4
Start programming according to the printed
information (Date and time/Your logo/Your
facsimile telephone number).
information (Date and time/Your logo/Your
facsimile telephone number).
OTHER HELP FUNCTION
You can print a quick reference for assistance, such
as the programming feature list, directory usage,
copier function, etc.
as the programming feature list, directory usage,
copier function, etc.
Press
(
or
)
until the item you want to print is
displayed in step 2, and press
w
. The unit will
start printing.
Program & Help
Installing the ink film
Setting the unit to receive faxes
Rear ink film roll
●
The included film roll will print about 28 A4-sized pages. Please purchase a full size
replacement film KX-FA55X (2 rolls). Each roll will print about 140 A4-sized pages.
replacement film KX-FA55X (2 rolls). Each roll will print about 140 A4-sized pages.
●
The ink film is completely safe to touch, and will not rub off on your hands like carbon paper.
3
Open the back cover.
2
Push the back cover open button
(green).
OR
Push the back cover open lever
(green).
(green).
OR
Push the back cover open lever
(green).
1
Open the front cover by pulling up
the center part.
the center part.
Center part
Front cover
Back cover
Back cover
open button
(green)
open button
(green)
Back cover
open lever
(green)
open lever
(green)
OR
6
Insert the rear ink film roll.
5
Insert the “T” shaped gear (blue)
into the left slot of the unit.
into the left slot of the unit.
4
Insert the blue core of the front ink
film roll into the right slot of the
unit.
film roll into the right slot of the
unit.
Right slot
Blue core
Front ink
film roll
film roll
“T” shaped
gear (blue)
gear (blue)
Left
slot
slot
8
Close the back cover (
#
) and
front cover (
$
) securely.
7
Turn the “T” shaped gear (blue) in the direction of the arrow.
●
Make sure that the ink film is wrapped around the blue core at least once.
Ink film
Slack
Reverse
Tight
Blue core
The ink film
is not wrapped
around the
blue core.
is not wrapped
around the
blue core.
“T” shaped gear (blue)
Incorrect
Correct
1
2
Front cover
Back cover
AUTO ANSWER ON
AUTO ANSWER OFF
Use this mode when you receive all calls
automatically.
automatically.
Press
PQ
to turn on the arrow
(
▼
) on the right of the display.
Use this mode when you
receive all calls manually.
receive all calls manually.
Press
PQ
to
turn off the arrow (
▼
) on
the right of the display.
▼
FAX ONLY mode
Turn AUTO ANSWER on.
When receiving calls:
All incoming calls will be
answered as faxes.
answered as faxes.
●
FAX ONLY mode can be used
for KX-FP155. To activate this
mode, set feature #77 to “FAX
ONLY” beforehand. See the
operating instructions for
details.
for KX-FP155. To activate this
mode, set feature #77 to “FAX
ONLY” beforehand. See the
operating instructions for
details.
TEL mode
Turn AUTO ANSWER off.
When receiving calls:
You have to answer all calls
manually.
To receive a fax document,
press
manually.
To receive a fax document,
press
j
.
Use the unit only as fax
(KX-FP151)
Mostly phone calls
Use the unit as answering
device/fax (KX-FP155)
TAD/FAX mode
Turn AUTO ANSWER on.
When receiving phone
calls:
calls:
The unit will activate the
answering device and
record voice messages.
answering device and
record voice messages.
When receiving faxes:
The unit will activate the fax
function to receive
documents.
function to receive
documents.
Document
guides
guides
FACE DOWN
QUICK SET UP
PRESS SET
QSS FP151/155GR(E)PFQW1662ZA 01.11.28 1:18 PM Page 1